Manufacturing & Automation Research Laboratory
© 2003-2013

Director:
T. Özel, Ph.D.
Associate Professor 
Industrial & Systems Engg. 
Rutgers University
96 Frelinghuysen Road, Piscataway, NJ 08854, USA
(848) 445-1099
E-mail: ozel@rutgers.edu

Related Publications

1. T. Özel, "Computational Modelling of 3-D Turning with Variable Edge Design Tooling: Influence of Micro-Geometry on Forces, Stresses, Friction and Tool Wear," Journal of Materials Processing Technology, 2009, Vol. 209, No. 11, pp. 5167-5177.
    

2. T. Özel, Y. Karpat, and A. Srivastava, "Hard Turning with Variable Micro-Geometry PcBN Tools," CIRP Annals- Manufacturing Technology, 2008, Vol. 57 pp. 73-76.
    

3. Y. Karpat and T. Özel, "Mechanics of High Speed Cutting with Curvilinear Edge Tools," International Journal of Machine Tools and Manufacture, Vol. 48, 2008, pp. 195-208.
    

4. Y. Karpat and T. Özel, “Analytical and Thermal Modeling of High-Speed Machining with Chamfered Tools,” ASME Journal of Manufacturing Science and Engineering, Vol. 130, Issue 1, February 2008.
    

5. Y. Karpat and T. Özel, "3-D FEA of Hard Turning: Investigation of PCBN Cutting Tool Micro- Geometry Effects," Transactions of NAMRI/SME, Volume 35, 2007, pp. 9-16.
    

6. T. Özel, Y. Karpat, L. Figueira and J. P. Davim, "Modelling of Surface Finish and Tool Wear in Turning of AISI D2 Steel Using Ceramic Wiper Inserts," Journal of Materials Processing Technology, Vol. 189, 2007, pp. 192-198.
    

7. Y. Karpat and T. Özel, " Multi-Objective Optimization For Turning Processes Using Neural Network Modeling And Dynamic-Neighborhood Particle Swarm Optimization," International Journal of Advanced Manufacturing Technology, Vol. 35, No.3-4, November 2007, pp. 234-247.
    

8. Y. Karpat and T. Özel, “An Integrated Analytical Thermal Model for Orthogonal Cutting with Chamfered Tools,” Transactions of North American Manufacturing Research Institute, Vol. XXXIV, 2006, pp. 9-16.
    

9. Y. Karpat and T. Özel, “Swarm-Intelligent Neural Network System (SINNS) Based Multi-Objective Optimization of Hard Turning,” Transactions of North American Manufacturing Research Institute, Vol. XXXIV, 2006, pp. 611-625.
    

10. Y. Karpat and T. Özel, “Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part II: Effect of Tool Flank Wear on Tool Forces, Stresses and Temperature Distributions,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, May 2006, pp. 445-453.
     

11. Y. Karpat and T. Özel, “Predictive Analytical and Thermal Modeling of Orthogonal Cutting Process. Part I: Predictions of Tool Forces, Stresses and Temperature Distributions,” ASME Journal of Manufacturing Science and Engineering, Vol.128, May 2006, pp. 435-444.
     

12. Y. Karpat and T. Özel, “Hard Turning Optimization Using Neural Network Modeling and Swarm Intelligence,” Transactions of North American Manufacturing Research Institute, 2005, Vol. XXXIII, pp. 179-186.
     

13. T. Özel and Y. Karpat, "Predictive Modeling of Surface Roughness and Tool Wear in Hard Turning Using Regression and Neural Networks," International Journal of Machine Tools and Manufacture, 2005, Vol. 45, pp. 467-479.
     

14. T. Özel, T-K. Hsu and E. Zeren, "Effects of Cutting Edge Geometry, Workpiece Hardness, Feed Rate and Cutting Speed on Surface Roughness and Forces in Finish Turning of Hardened AISI H13 Steel", International Journal of Advanced Manufacturing Technology, 2005, Vol. 25, pp. 262-269.
     

15. T. Özel and Y. Karpat, "Predictive Modeling of Hard Turning Processes Using Neural Networks," CD Proceedings of 13th Industrial Engineering Research Conference (IERC), Extended Abstract, May 15-19, 2004, Houston, Texas.
     

16. T. Özel and T-K. Hsu, "Internet-Based Remote Monitoring of Experiments in Hard Turning," CD Proceedings of 13th Industrial Engineering Research Conference (IERC), Extended Abstract, May 15-19, 2004, Houston, Texas.
     

17. T. Özel and Y. Karpat, "Prediction of Surface Roughness and Tool Wear in Finish Dry Hard Turning Using Back Propagation Neural Networks", Proceedings of the 17th International Conference on Production Research (ICPR), August 3-7, 2003, Blacksburg, Virginia. 
     

18. T.  Özel, "Modeling of Hard Part Machining: Effect of Insert Edge Preparation for CBN Cutting Tools," Journal of Materials Processing Technology, 2003, Vol.141, pp. 284-293. 
     

19. T. Özel and A. Nadgir, "Prediction of Flank Wear by Using Back Propagation Neural Network Modeling When Cutting Hardened AISI H-13 Steel with Chamfered and Honed CBN Tools," International Journal of Machine Tools and Manufacture, 2002, Vol.42, pp. 287-297.