Journal Articles

More than 600 papers, including over 230 in archival journals and 22 chapters in books. The journal papers and some selected conference and keynote papers are listed below.

1972-1991 articles 1992 articles 1993 articles 1994 articles 1995 articles 1996 articles 1997 articles 1998 articles 1999 articles 2000 articles 2001 articles 2002 articles 2003 articles 2004 articles 2005 articles 2006 articles 2007 articles 2008 articles 2009 articles 2010 articles 2011 articles 2012 articles 2013 articles 2014 articles 2015 articles 2016 articles 2017 articles 2018 articles 2019 articles 2020 articles 2021 articles Selected International Conference Papers Keynote Papers

Old Journal Articles

Back to the Top

Moore, F.K. and Jaluria, Y., "Thermal effects of power plants on lakes," ASME J. Heat Transfer, Vol. 94, pp. 163-168: 1972

Jaluria, Y. and Gebhart, B., "An experimental study of non-linear disturbance behavior in natural convection," J. Fluid Mech.,Vol. 61, pp. 337-365: 1973

Jaluria, Y. and Gebhart, B., "On transition mechanisms in vertical natural convection flow," J. Fluid Mech., Vol. 66, pp. 309-337: 1974

Jaluria, Y. and Gebhart, B., "Stability and transition of buoyancy induced flows in a stratified medium," J. Fluid Mech., Vol. 6 pp. 593-612: 1974

Jaluria, Y. and Gebhart, B., "On the buoyancy-induced flow arising from a heated hemisphere," Int. J. Heat Mass Transfer, Vol. 18, pp. 415-431: 1975

Jaluria, Y., "Vertical natural convection in an adiabatically stratified medium," Int. Comm. Heat Mass Transfer, Vol. 2, pp.151-158: 1975

Jaluria, Y., "Transient heat transfer in long insulated wires," ASME J. Heat Transfer, Vol. 98, pp. 127-132: 1976

Jaluria, Y., "On the introduction of disturbances in a natural convection flow," Int. J. Heat Mass Transfer, Vol. 19, pp. 1057-1063: 1976

Jaluria, Y., "Natural convection flow interaction above a heated body," Int. Comm. Heat Mass Transfer, Vol. 3, pp. 457-466: 1976

Jaluria, Y., "Temperature regulation of a plastic-insulated wire in radiant heating," ASME J. Heat Transfer, Vol. 98, pp. 678-680: 1976

Jaluria, Y. and Gebhart, B., "Buoyancy-induced flow arising from a line thermal source on an adiabatic vertical surface," Int. J. Heat Mass Transfer, Vol. 20, pp. 153-157: 1977

Jaluria, Y. and Gebhart, B., "On disturbance growth mechanisms in a buoyancy-induced flow," Int. J. Heat Mass Transfer, Vol. 20, pp. 434-437: 1977

Jaluria, Y., "Fluid temperature and mixed convection effects in hot-wire measurements of natural convection flows," ASME J. Applied Mech., Vol. 46, pp. 231-233: 1979

Jaluria, Y., "An experimental study of the interface of a condensing vapor region," Int. J. Heat Mass Transfer, Vol. 22, pp. 865-873: 1979

Appalaswamy, A.V. and Jaluria, Y., "Axisymmetric plume flow in a vertical uniform free stream," ASME J. Applied Mech., Vol. 47, pp. 667-669: 1980

Ramachandran, N., Jaluria, Y. and Gupta, J.P., "Thermal and fluid flow characteristics in one-dimensional solidification," Int. Comm. Heat Mass Transfer, Vol. 8(1), pp. 69-77: 1981

Gupta, S.K. and Jaluria, Y., "Transient thermal effects in an enclosed water body due to heated water discharge for heat rejection and solar energy storage," Energy Conversion, Vol. 21, pp. 3-8: 1981

Prasad, V. and Jaluria, Y., "Film condensation on a horizontal isothermal surface," Chem. Engg. Comm., Vol. 11, pp. 231-240: 1981

Ramachandran, N., Gupta, J.P. and Jaluria, Y., "Two-dimensional solidification with natural convection in the melt and convective and radiative boundary conditions," Numerical Heat Transfer, Vol. 4, pp. 469-484: 1981

Sehgal, R.C. and Jaluria, Y., "On the horizontal recirculation in water bodies due to thermal discharge," Energy, The International Journal, Vol. 7, pp. 419-428: 1982

Jaluria, Y., "Mixed convection in a wall plume," Computers and Fluids, Vol. 10, pp. 95-104: 1982

Jaluria, Y., "Buoyancy-induced flow due to isolated thermal sources on a vertical surface," ASME J. Heat Transfer, Vol. 104, pp. 223-227: 1982

Prasad, V. and Jaluria, Y., "Transient film condensation on a finite horizontal plate," Chem. Engg. Comm., Vol. 13, pp. 327-342: 1982

Jaluria, Y. and Gupta, S.K., "Decay of thermal stratification in a water body for solar energy storage," Solar Energy, Vol. 28, pp. 137-143: 1982

Himasekhar, K. and Jaluria, Y., "Laminar buoyancy-induced axi-symmetric free boundary flows in a thermally stratified medium," Int. J. Heat Mass Transfer, Vol. 25, pp. 213-221: 1982

Himasekhar, K. and Jaluria, Y., "Laminar buoyancy-induced axi-symmetric free boundary flows in a thermally stratified medium," Int. J. Heat Mass Transfer, Vol. 25, pp. 213-221: 1982

Ramachandran, N., Gupta, J.P. and Jaluria, Y., "Thermal and fluid flow effects during solidification in a rectangular enclosure", Int. J. Heat Mass Transfer, Vol. 25, pp. 187-194: 1982

Ramachandran, N., Gupta, J.P. and Jaluria, Y., "Experiments on solidification with natural convection in a rectangular enclosed region," Int. J. Heat Mass Transfer, Vol. 25, pp. 595-596: 1982

Satyanarayana, S. and Jaluria, Y., "A study of laminar buoyant jets discharged at an inclination with the vertical buoyancy force," Int. J. Heat Mass Transfer, Vol. 25, pp. 1569-1577: 1982

Jaluria, Y., "Thermal-plume interaction with vertical surfaces," Int. Comm. Heat Mass Transfer, Vol. 9, pp. 107-117: 1982

Gupta, S.K. and Jaluria, Y., "An experimental and analytical study of thermal stratification in an enclosed water region due to thermal energy discharge," Energy Conversion, Vol. 22, pp. 63-70: 1982

Jaluria, Y. and Gupta, S.K., "A numerical study of mixed convection flow in enclosures," Int. J. Energy Res., Vol. 7, pp. 201-210: 1983

Jaluria, Y. and Singh, A.P., "Temperature distribution in a moving material subjected to surface energy transfer," Comp. Meth. Appl. Mech. and Engg., Vol. 41, pp. 145-157: 1983

Jaluria, Y. and Himasekhar, K., "Buoyancy induced two-dimensional vertical flows in a thermally stratified environment," Computers and Fluids, Vol. 11, pp. 39-49: 1983

Cha, C.K. and Jaluria, Y., "Recirculating mixed convection flow for energy extraction," Int. J. Heat Mass Transfer, 27, pp. 1801-1812: 1984

Cha, C.K. and Jaluria, Y., "Effect of thermal buoyancy on the recirculating flow in a solar pond for energy extraction and heat rejection," ASME J. Solar Energy Engg, Vol. 106, pp. 428-437: 1984

Jaluria, Y., "Numerical study of the thermal processes in a furnace," Numerical Heat Transfer, Vol. 7, pp. 211-224: 1984

Jaluria, Y. and Cha, C.K., "Heat rejection to the surface layer of a solar pond," ASME J. Heat Transfer, Vol. 107, pp. 99-106: 1985

Jaluria, Y., "Interaction of natural convection wakes arising from thermal sources on a vertical surface," ASME J. Heat Transfer, Vol. 107, pp. 883-892: 1985

Goldman, D. and Jaluria, Y., "Effect of opposing buoyancy on the flow in free and wall jets," J. Fluid Mech., Vol. 166, pp. 41-56: 1986

Karwe, M.V. and Jaluria, Y., "Thermal transport from a heated moving surface," ASME J. Heat Transfer, Vol. 108, pp. 728-733: 1986

Jaluria, Y., "Mixed convection flow over localized multiple thermal sources on a vertical surface," Physics of Fluids, Vol. 29, pp. 934-940: 1986

Karwe, M.V. and Jaluria Y., "Fluid flow and mixed convection transport from a moving plate in rolling and extrusion processes," ASME J. Heat Transfer, Vol. 110, pp. 655-661: 1988

Jaluria, Y. and Kapoor, K., "Importance of wall flows at the early stages of fire growth in the mathematical modeling of enclosure fires," Combust. Sci. Tech., 59, 355-369: 1988

Jaluria, Y., "Numerical simulation of the transport processes in a heat treatment furnace," Int. J. Num. Meth. Engg., Vol. 25, pp. 387-399: 1988

Abib, A. and Y. Jaluria, "Numerical simulation of the buoyancy-induced flow in a partially open enclosure," Numerical Heat Transfer, Vol. 14, pp. 235-254: 1988

Kapoor, K. and Jaluria, Y. "An experimental study of the generation and characteristics of a two-layer thermally stable environment," Int. Comm. Heat Mass Transfer, Vol. 15, pp. 751-764: 1988

Agarwal, R. and Jaluria, Y., "Deflection of a two-dimensional natural convection wake due to the presence of a vertical surface in close proximity," J. Fluid Mech., Vol. 201, pp. 35-56: 1989

Kapoor, K. and Jaluria, Y. "Heat transfer from a negatively buoyant wall jet," Int. J. Heat Mass Transfer, Vol. 32, pp. 697-709: 1989

Jaluria, Y. and O'Mara, B.T., "Thermal field in a water body for solar energy storage and extraction due to a buoyant two-dimensional surface water jet," Solar Energy, 43, 129-138: 1989

Jaluria, Y. and Cooper, L. Y. "Negatively buoyant wall flows generated in enclosure fires," Prog Energy Combust. Sci. Vol. 15, pp. 159-182: 1989

Jaluria, Y. and Kapoor, K., "Importance of wall flows at the early stages of fire growth in the mathematical modeling of enclosure fires," Combust. Sci. Tech., 59, 355-369: 1988

Kang, B.H. and Jaluria, Y., "Natural convection heat transfer characteristics of a protruding thermal source located on horizontal and vertical surfaces," Int. J. Heat Mass Transfer, Vol. 33, pp. 1347-1357: 1990

Kang, B.H. and Jaluria, Y., "Mixed convection transport from a protruding heat source module on a vertical surface," AIAA J. Thermophysics Heat Transfer, Vol. 4, pp. 384-390: 1990

Kang, B., Jaluria, Y. and Tewari, S. "Mixed convection transport from an isolated heat source module on a horizontal plate," ASME J. Heat Transfer, Vol. 112, pp. 653-661: 1990

Tewari, S. and Jaluria, Y., "Mixed convection heat transfer from thermal sources mounted on horizontal and vertical surfaces," ASME J. Heat Transfer, Vol.112, pp. 975-987: 1990

Tewari, S.S. and Jaluria, Y., "Calibration of constant-temperature hot-wire anemometers for very low velocities in air," Rev. Sci. Instrum., Vol. 61 (12), pp. 3834-3845: 1990

Papanicolaou, E. and Jaluria, Y., "Mixed convection from an isolated source in a rectangular enclosure," Numerical Heat Transfer, Vol. 18, pp. 427-461: 1990

Kang, B.H., Jaluria, Y. and Karwe, M.V., "Numerical Simulation of conjugate transport from a continuous moving plate in materials processing," Numerical Heat Transfer, Vol. 19, pp. 151-176: 1991

Viswanath, R. and Jaluria, Y., "Knowledge-based system for the computer aided design of ingot casting processes," Engg. with Computers, Vol. 7, pp. 109-120: 1991

Tewari, S.S. and Jaluria, Y., "Convective heat transfer with buoyancy effects from thermal sources on a flat plate," AIAA J. Thermophysics Heat Transfer, Vol. 5, pp. 199-207: 1991

Jaluria, Y. and Lombardi, D., "Use of expert systems in the design of thermal equipment and processes," Res. Engg. Design, Vol. 2, pp. 239-253: 1991

Karwe, M.V. and Jaluria, Y., "Numerical simulation of thermal transport associated with a continuously moving flat sheet in materials processing," ASME J. Heat Transfer, Vol. 113, pp. 612-619: 1991

1992 Journal Articles

Back to the Top

Jaluria, Y., Transport from continuously moving materials undergoing thermal processing, Ann. Rev. Heat Transfer, Vol. 4, pp. 187-245: 1992

Gopalakrishna, S., Jaluria, Y., and Karwe, M.V., Heat and mass transfer in a single screw extruder for non-Newtonian materials, Int. J. Heat Mass Transfer, Vol. 35, pp. 221-237: 1992

Gupta, M., Kwon, T.H. and Jaluria, Y., Multivariant finite elements for three-dimensional simulation of viscous incompressible flows, Int. J. Num. Meth. Fluids, Vol. 14, pp. 557- 585: 1992

Karwe, M.V. and Jaluria, Y., Experimental investigation of thermal transport from a heated moving plate, Int. J. Heat Mass Transfer, Vol. 35, pp. 493-511: 1992

Kang, B.H. and Jaluria, Y., A numerical study of the fluid flow and heat transfer due to a heated plate moving in a uniform forced flow, Numerical Heat Transfer, Vol. 21, pp. 101- 123: 1992

Papanicolaou, E. and Jaluria, Y., Transition to a periodic regime in mixed convection in a square cavity, J. Fluid Mech., Vol. 239, pp. 489-509: 1992

Jaluria, Y. and Kapoor, K., Wall and corner flows driven by a ceiling jet in an enclosure fire, Combust. Sci. Tech., Vol. 86, pp. 311-326: 1992

Lombardi, D., Jaluria, Y. and Viswanath, R., Simulation of the transport processes in a thermal manufacturing system using symbolic computation, Engg. Applic. Artif. Intell., Vol. 5, pp. 155-166: 1992

1993 Journal Articles

Back to the Top

Kapoor, K. and Jaluria, Y., Penetrative convection of a plane turbulent wall jet in a two-layer thermally stable environment : A problem in enclosure fires, Int. J. Heat Mass Transfer, Vol. 36, pp. 155-167: 1993

Kang, B.H. and Jaluria, Y., Thermal Modeling of the Continuous Casting Process, AIAA J. Thermophysics Heat Transfer, Vol. 7, pp. 139-147: 1993

Gupta, M., Jaluria, Y., Sernas, V., Esseghir, M. and Kwon, T.H., Numerical and experimental investigation of three-dimensional flow in extrusion dies, Polymer Engg. Sci., Vol. 33, pp. 393-399: 1993

Papanicolaou, E. and Jaluria, Y., Mixed convection from a localized heat source in a cavity with conducting walls: A numerical study, Numerical Heat Transfer, Vol. 23, Part A, pp. 463-484: 1993

Viswanath, R. and Jaluria, Y., A comparison of different solution methodologies for melting and solidification problems in enclosures: , Numerical Heat Transfer, Vol. 24, Part B, pp. 77- 105: 1993

Ling, S.R., Steinberg, L. and Jaluria, Y., MSG: A computer system for automated modeling of heat transfer, Artif. Intell. Engg. Design, Anal. and Mfg. (AI EDAM), Vol. 7, pp. 287- 300: 1993

1994 Journal Articles

Back to the Top

Kang, B.H., Yoo, J. and Jaluria, Y., Experimental study of the convective cooling of a heated continuously moving material, ASME J. Heat Transfer, Vol. 116, pp. 199-208: 1994

Roy Choudhury, S. and Jaluria, Y., Analytical solution for the transient temperature distribution in a moving rod or plate of finite length with surface heat transfer, Int. J. Heat Mass Transfer, Vol. 37, pp. 1193-1205: 1994

Sastrohartono, T., Jaluria, Y. and Karwe, M.V., Numerical coupling of multiple region simulations to study transport in a twin-screw extruder, Numerical Heat Transfer, Vol. 25, pp. 541-557: 1994

Kang, B.H. and Jaluria, Y., Convective heat transfer from a continuously moving material in a parallel channel flow for thermal processing, AIAA J. Thermophysics Heat Transfer, Vol. 8, pp. 546-554: 1994

Roy Choudhury, S. and Jaluria, Y., Forced convective heat transfer from a continuously moving heated cylindrical rod in materials processing, ASME J. Heat Transfer, Vol. 116, pp. 724-734: 1994

Roy Choudhury, S., Jaluria, Y., Vaskopoulos, T. and Polymeropoulos, C.E., Forced convective cooling of optical fiber during drawing process, ASME J. Heat Transfer, Vol. 116, pp. 790-794: 1994

Jamalabad, V.R., Langrana, N.A. and Jaluria, Y., Heuristic design for a material processing component, Engg. With Computers, Vol. 10, pp. 81-94: 1994

Jaluria, Y.,Transport in non-Newtonian fluids undergoing thermal processing, J. Mater. Proc. Mfg. Sci., Vol. 3, pp. 33-58: 1994

Papanicolaou, E. and Jaluria, Y., Mixed convection from simulated electronic components at varying relative positions in a cavity, ASME J. Heat Transfer, Vol. 116, pp. 960-970: 1994

Gopalakrishna, S. and Jaluria, Y., Computational study of transport processes in a single- screw extruder for non-Newtonian chemically reactive materials, Sadhana, Ind. Acad. Sci., Vol. 9, Part 5: 1994

1995 Journal Articles

Back to the Top

Chiruvella, R.V., Jaluria, Y. and Abib, A., Numerical simulation of fluid flow and heat transfer in a single screw extruder with different dies, Polymer Engg. Sci., Vol. 35, pp. 261- 273: 1995

Roy Choudhury, S. and Jaluria, Y., Cylinder moving in pressure- and buoyancy-induced channel flow: A numerical study of transport due to three aiding/opposing mechanisms, Numerical Heat Transfer, Vol. 27, pp. 373-393: 1995

Karwe, M.V., Chiruvella, R.V. and Jaluria, Y., Co-ordinate system independence of shear rate during isothermal single-screw extrusion of a Newtonian fluid, J. Food Process Engg., Vol. 18, pp. 55-69: 1995

Viswanath, R. and Jaluria, Y., Numerical study of conjugate transient solidification in an enclosed region, Numerical Heat Transfer, Vol. 27, pp. 519-536: 1995

Sastrohartono, T., Jaluria, Y., Esseghir, M. and Sernas, V., A numerical and experimental study of three-dimensional transport in the channel of an extruder for polymeric materials, Int. J. Heat Mass Transfer, Vol. 38, pp. 1957-1973: 1995

Abib, A.H. and Jaluria, Y., Penetrative convection in a stably stratified enclosure, Int. J. Heat Mass Transfer, Vol. 38, pp. 2489-2500: 1995

Lee, S.H.-K. and Jaluria, Y., Effects of streamwise convergence in radius on the laminar forced convection in axisymmetric ducts, Numerical Heat Transfer, Vol. 28, pp. 19-38: 1995

Lee, S.H.-K. and Jaluria, Y., The effects of geometry and temperature variations on the radiative transport during optical fiber drawing, J. Mater. Proc. Mfg. Sci., Vol. 3, pp. 317- 331: 1995

Sastrohartono, T., Jaluria, Y. and Karwe, M.V., Numerical simulation of fluid flow and heat transfer in twin-screw extruders for non-Newtonian materials, Polymer Engg. Sci., Vol. 35, pp. 1213-1222: 1995

Papanicolaou, E. and Jaluria, Y.,Computation of turbulent flow in mixed convection in a cavity with a localized heat source, ASME J. Heat Transfer, Vol. 117, pp. 649-658: 1995

Abib, A. and Jaluria, Y., Turbulent penetrative and recirculating flow in a compartment fire, ASME J. Heat Transfer, Vol. 117, pp. 927-935: 1995

Jaluria, Y., Chiu, W.K.S. and Lee, S.H.-K., Flow of smoke and hot gases across horizontal vents in room fires, Combust. Sci. Tech., Vol. 110-111, pp. 197-208: 1995

1996 Journal Articles

Back to the Top

Chiruvella, R.V., Jaluria, Y., Esseghir, M. and Sernas, V., Extrusion of non-Newtonian fluids in a single-screw extruder with pressure back flow, Polymer Engg. Sci., Vol. 36, pp. 358-367: 1996

Kapoor, K. and Jaluria, Y., Flow and heat transfer due to a buoyant ceiling jet turning downward at a corner, ASME J. Heat Transfer, Vol. 118, pp. 38-46: 1996

Chiruvella, R.V., Jaluria, Y., Karwe, M.V. and Sernas, V., Transport in a twin-screw extruder for the processing of polymers, Polymer Engg. Sci., Vol. 36, pp. 1531-1540: 1996

Issa, J., Yin, Z., Polymeropoulos, C.E. and Jaluria, Y., Temperature distribution in an optical fiber draw tower furnace, J. Mater. Proc. Mfg. Sci., Vol. 4, pp. 221-232: 1996

Jaluria, Y., Heat and mass transfer in the extrusion of non-Newtonian materials, Advances in Heat Transfer, Vol. 28, pp. 145-230: 1996

Lee, S.H.-K. and Jaluria, Y., Effects of variable properties and viscous dissipation during optical fiber drawing, ASME J. Heat Transfer, Vol. 118, pp. 350-358: 1996

Kapoor, K. and Jaluria, Y., Penetrative flow due to an isothermal vertical wall in a stable two-layer environment generated by a room fire, Int. J. Heat Mass Transfer, Vol. 39, pp. 3977-3987: 1996

Lin, P. and Jaluria, Y., Numerical approach to model heat transfer in polymer melts flowing in constricted channels, Numerical Heat Transfer, Vol. 30, pp. 103-123: 1996

Abib, A. and Jaluria, Y., Generation of stable thermal stratification in a partially enclosed space due to a room fire, Int. J. Num. Meth. Heat Fluid Flow, Vol. 6, pp. 31-52: 1996

1997 Journal Articles

Back to the Top

Lee, S.H.-K. and Jaluria, Y., Simulation of the transport processes in the neck-down region of a furnace drawn optical fiber, Int. J. Heat Mass Transfer, Vol. 40, pp. 843-856: 1997

Chiruvella, R.V., Jaluria, Y. and Karwe, M.V., Numerical simulation of extrusion cooking of starchy materials, J. Food Engg., Vol. 30, pp. 449-467: 1997

Lin, P. and Jaluria, Y., Conjugate transport in polymer melt flow through extrusion dies, Polymer Engg. Sci., Vol. 37: 1997

Lin, P. and Jaluria, Y., Heat transfer and solidification of polymer melt flow in a channel, Polymer Engg. Sci., Vol. 37, pp. 1247-1258: 1997

Yin, Z. and Jaluria, Y., Zonal method to model radiative transport in an optical fiber drawing furnace, ASME J. Heat Transfer, Vol. 119, pp. 597-603: 1997

Phipps, M.R., Jaluria, Y. and Eklund, T., Helium-based simulation of smoke spread due to fire in enclosed spaces, Combust. Sci. Tech., Vol. 128, pp. 49-72: 1997

1998 Journal Articles

Back to the Top

Roy Choudhury, S. and Jaluria, Y., Practical aspects in the drawing of an optical fiber, J. Mater. Res., Vol. 13, pp. 483-493: 1998

Roy Choudhury, R. and Jaluria, Y., Thermal transport due to material and gas flow in a furnace for drawing an optical fiber, J. Mater. Res., Vol. 13, pp. 494-503: 1998

Jaluria, Y., Lee, S.H.-K., Mercier, G.P. and Tan, Q., Transport processes across a horizontal vent due to density and pressure differences, Exp. Thermal Fluid Sci., Vol. 16, pp. 260-273: 1998

Jaluria, Y., Numerical modeling of materials processing systems, Comput. Mechanics, Vol. 21, pp. 199-210: 1998

Gupta, A. and Jaluria, Y., Forced convective liquid cooling of arrays of protruding heated elements mounted in a rectangular duct, ASME J. Elect. Pkg. : Sept 1998

Lin, P. and Jaluria, Y., Conjugate thermal transport in the channel of an extruder for non-Newtonian fluids, Int. J. Heat Mass Transfer, Vol. 41, pp. 3239-3253: 1998

Kim, S.Y., Kang, B.H., and Jaluria, Y.,Thermal interaction between isolated heated electronic components in pulsating channel flow, Numerical Heat Transfer, Vol. 34, Part A, pp. 1-21: 1998

Kim, S.Y. and Jaluria, Y., Basic considerations in combined buoyancy-induced and forced flow in a vertical open shaft, Numerical Heat Transfer, Vol. 34, pp. 519-536: 1998

Yin, Z. and Jaluria, Y., Thermal transport and material flow in high speed optical fiber drawing, ASME J. Heat Transfer, Vol. 120, pp. 916-930: 1998

1999 Journal Articles

Back to the Top

Roy Choudhury, S., Jaluria, Y. and Lee, S.H.-K., Generation of neck-down profile for furnace drawing of optical fiber, Numerical Heat Transfer, Vol.35, pp. 1-24: 1999

Jaluria, Y., Liu, Y., and Chiruvella, R.V., Modeling and simulation of the solids conveying and unfilled regions in polymer extrusion, J. Reinforced Plastics Composites, Vol. 18, pp. 15-26: 1999

Mercier, G.P. and Jaluria, Y., Fire-induced flow of smoke and hot gases in open vertical enclosures, Exp. Thermal Fluid Sci., Vol. 19, pp. 77-84: 1999

Chiu, W.K.S. and Jaluria, Y., Effect of buoyancy, susceptor motion, and conjugate transport in chemical vapor deposition systems, ASME J. Heat Transfer, Vol. 121, pp. 757-761: 1999

Banaszek, J., Jaluria, Y., Kowalewski, T.A., and Rebow, M., Semi-implicit FEM analysis of natural convection in freezing water, Numerical Heat Transfer, Vol. 36, pp. 449-472: 1999

2000 Journal Articles

Back to the Top

Chiu, W.K.S. and Jaluria, Y., Continuous chemical vapor deposition processing with a moving finite thickness susceptor, J. Mater. Res.,Vol. 15, pp. 317-328: 2000

Yin, Z. and Jaluria, Y., Neck down and thermally induced defects in high speed optical fiber drawing, ASME J. Heat Transfer,Vol. 122: 2000

Chiu, W. K.-S., Jaluria, Y., and Glumac, N.G., Numerical simulation of chemical vapor deposition processes under variable and constant property approximations, Numerical Heat Transfer, Vol. 37, pp. 113-132: 2000

Chiu, W. K.-S., Richards, C.J., and Jaluria, Y., Flow structure and heat transfer in a horizontal converging channel heated from below, Physics of Fluids, Vol. 12, pp. 2128-2136: 2000

2001 Journal Articles

Back to the Top

Tan, Q. and Jaluria, Y., "Flow through a horizontal vent in an enclosure fire," Int. J. Heat Mass Transfer, Vol. 44, pp. 1543-1553: 2001

Zhu, W. and Jaluria, Y., "Transport processes and feasible operating domain in a twin-screw polymer extruder," Polymer Engg. Sci., Vol. 41, pp. 107-117: 2001

Zhu, W. and Jaluria, Y., "Residence time and conversion in the extrusion of chemically reactive materials," Polymer Engg. Sci., Vol. 41, pp. 1280-1291: 2001

Chiu, W.K.S., Richards, C.J., and Jaluria, Y.,"Experimental and numerical study of conjugate heat transfer in a horizontal channel heated from below," ASME J. Heat Transfer, Vol. 123, pp. 688-697: 2001

Jaluria, Y., "Fluid flow phenomena in materials processing - The 2000 Freeman Award Lecture," ASME J. Fluids Engg., Vol. 123, pp. 173-210, 2001: 2001

2002 Journal Articles

Back to the Top

Cheng, X. and Jaluria, Y., "Effect of draw furnace geometry on high speed optical fiber manufacturing," Numerical heat Transfer, Numerical heat Transfer, Vol. 41, pp. 757-781: 2002

Wang, Q. and Jaluria, Y., "Unsteady mixed convection in a horizontal channel with protruding heated blocks and a rectangular vortex promoter," Phys. Fluids, Vol. 14, pp. 2109-2112: 2002

Chiu, W.K.S., Jaluria, Y. and Glumac, N.G.,"Control of thin film growth in chemical vapor deposition manufacturing systems," ASME J. Mfg. Sci. Engg., Vol. 124, pp. 715-724: 2002

Wang, Q. and Jaluria, Y., "Instability and heat transfer in mixed convection in a horizontal duct with discrete heat sources," Numerical Heat Transfer, Vol. 42, pp. 445-463: 2002

Yoo, H. and Jaluria, Y., "Thermal aspects in the continuous Chemical Vapor Deposition of silicon," J. Heat Transfer, Vol. 124, pp. 938-946: 2002

Wang, Q. and Jaluria, Y., "Unsteady mixed convection in a horizontal channel with protruding heated blocks and a rectangular vortex promoter," Phys. Fluids, Vol. 14, pp. 2109-2112: 2002

Zhu, W. and Jaluria, Y., "Steady and transient flow of a non-Newtonian chemically reactive fluid in a twin-screw extruder," Polymer Engg. Sci., Vol. 42, pp. 2120-2136: 2002

2003 Journal Articles

Back to the Top

Wang, Q., Yoo, H., and Jaluria, Y., "Convection in a horizontal duct under constant and variable property formulations," Int. J. Heat Mass Transfer, Vol. 46, pp. 297-310: 2003

Rattan, K. and Jaluria, Y, "Simulation of the flow in a coating applicator for optical fiber manufacture," Computational Mechanics, Vol. 31, pp. 428-436: 2003

Jaluria, Y., "Thermal processing of materials: From basic research to engineering," J. Heat Transfer, Vol. 125, pp. 957-979: 2003

2004 Journal Articles

Back to the Top

Wang, Q. and Jaluria, Y., "Three Dimensional Conjugate Heat Transfer in a Horizontal Duct with Discrete Heat Sources," ASME J. Heat Transfer, Vol. 126, pp. 642-647: 2004

Icoz, T. and Jaluria, Y., "Design of cooling systems for electronic equipment using both experimental and numerical inputs," ASME J. Elect. Pkg., Vol. 126, pp. 465-471: 2004

Cheng, X. and Jaluria, Y., "Feasible Domain of High Speed Optical Fiber Drawing," ASME J. Heat Transfer, Vol. 126, pp. 852-857: 2004

2005 Journal Articles

Back to the Top

Cheng, X. and Jaluria, Y., "Optimization of a thermal manufacturing process: Drawing of optical fiber," Int. J. Heat Mass Transfer, Vol. 48, pp. 3560-3573, 2005.

Cheng, X. and Jaluria, Y., "Effect of furnace thermal configuration on optical fiber heating and drawing," Numerical Heat Transfer, Vol. 48, pp. 507-528, 2005.

Icoz, T. and Jaluria, Y., "Numerical simulation of boundary conditions and the onset of instability in natural convection due to protruding thermal sources in an open rectangular channel," Numerical Heat Transfer, Vol. 48, pp. 831-847, 2005.

2006 Journal Articles

Back to the Top

Yoo, S.Y. and Jaluria, Y., "Isothermal flow in an Optical Fiber Coating Applicator and Die System," J. Lightwave Tech., Vol. 24, pp. 449-463, 2006.

Icoz, T., Verma, N. and Jaluria, Y., "Design of air and liquid cooling systems for electronic components using concurrent simulation and experiment," ASME J. Electronic Pkg., Vol. 128, pp. 466-478, 2006.

Icoz, T. and Jaluria, Y., "Optimization of vortex promoter design using a dynamic data driven approach," ASME J. Heat Transfer, Vol. 128, pp. 1081-1092, 2006.

2007 Journal Articles

Back to the Top

Zhao, H., Icoz, T., Jaluria, Y. and Knight, D., "Application of data driven design optimization methodology to a multi-objective design optimization problem," J. Engg. Design, Vol. 18, pp. 343-359, 2007.

Chen, C. and Jaluria, Y., "Modeling of radiation heat transfer in the drawing of an optical fiber with multi-layer structure," ASME J. Heat Transfer, Vol. 129, 2007.

Chen, C. and Jaluria, Y., "Numerical simulation of transport in optical fiber drawing with core-cladding structure," ASME J. Heat Transfer, Vol. 129, 2007.

Yoo, S.Y. and Jaluria, Y., "Fluid flow and heat transfer in an optical fiber coating process," Int. J. Heat Mass Transfer, Vol. 50, pp. 1176-1185, 2007.

Yoo, S.Y. and Jaluria, Y., "Conjugate heat transfer in an optical fiber coating process," Numerical Heat Transfer, Vol. 51, pp. 109-127, 2007.

Andreozzi, A., Jaluria, Y. and Manca, O., "Numerical investigation on transient natural convection in a horizontal channel heated from upper wall," Numerical Heat Transfer, Vol. 51, pp. 815-842, 2007.

2008 Journal Articles

Back to the Top

Yoo, S.Y. and Jaluria, Y., "Numerical simulation of the meniscus in non-isothermal free surface flow at the exit of a coating die," Numerical Heat Transfer, Vol. 53, pp. 111-131, 2008.

Jaluria, Y., "Numerical simulation of complex transport phenomena arising in practical thermal systems," Int. J. Num. Meth. Heat Transfer Fluid Flow, Vol. 18, pp. 288-307, 2008.

Yoo, S.Y. and Jaluria, Y., "Computational study of convective transport in a coating applicator for a non-Newtonian fluid," Numerical Heat Transfer, Vol. 54, pp. 915-932, 2008.

2009 Journal Articles

Back to the Top

Lin, Po Ting, Jaluria, Y. and Gea, H.C., "Parametric Modeling and Optimization of Chemical Vapor Deposition Process," J. Manu. Sci. Eng., Vol.131, pp. 011011-1 to 7, 2009.

Jaluria, Y., "Simulation-based optimization of thermal systems," Applied Thermal Engineering, Vol. 29, pp. 1346-1355, 2009.

Yang, J. and Jaluria, Y., "Feasibility and optimization of the hollow optical fiber drawing process," Int. J. Heat Mass Transfer, Vol. 52, pp. 4108-4116, 2009.

Yang, J. and Jaluria, Y., "Transport processes governing the drawing of a hollow optical fiber," ASME J. Heat Transfer, Vol. 131, pp. 072102-1 to 9, 2009.

Jaluria, Y., Microscale transport phenomena in materials processing, ASME J. Heat Transfer, Vol. 131, pp. 033111-1 to 17, 2009.

Chen, C. and Jaluria, Y., "Effects of doping on the optical fiber drawing process," Int. J. Heat Mass Transfer, Vol. 52, pp. 4812-4822, 2009.

George, P., Lin, P.T., Gea, H.C., and Jaluria, Y., "Reliability-based optimization of chemical vapor deposition process," Int. J. Reliability Safety, Vol. 3, pp. 363-383, 2009.

Zun, Z. and Jaluria, Y., "Numerical modeling of pressure-driven nitrogen slip flow in long rectangular microchannels, " Numerical Heat Transfer, Vol. 56, pp. 541-562, 2009.

2010 Journal Articles

Back to the Top

Jaluria, Y., "Experimental data driven simulation of convective transport," Comput. Thermal Sci., Comput. Thermal Sci., Vol. 2, pp. 79-101, 2010.

Sun, Z. and Jaluria, Y., "Unsteady two-dimensional nitrogen flow in long microchannels with uniform wall heat flux," Numerical Heat Transfer, Vol. 57, pp. 625-641, 2010.

Jaluria, Y., "Role of experiments in the accurate numerical simulation of thermal processes," Int. J. Num. Meth. Heat Fluid Flow, Vol. 20, pp. 467-491, 2010.

Zhang, T., Jia, L., Yang, L. and Jaluria, Y., "Effect of viscous heating on heat transfer performance in microchannel slip flow region," Int. J. Heat Mass Transfer, Vol. 53, pp. 4927-4934, 2010.

Lin, P.T., Gea, H.C. and Jaluria, Y., "Systematic strategy for modeling and optimization of thermal systems with design uncertainties," Frontiers Heat Mass Transfer, Vol. 1, 013003, pp. 1-20, 2010.

2011 Journal Articles

Back to the Top

Jaluria, Y. and Yang, J., "A review of microscale transport in the thermal processing of new and emerging advanced materials," J. Heat Transfer, Vol. 133, pp. 060906-1 to 14, 2011.

Sun, Z. and Jaluria, Y., "Conjugate thermal transport in gas flow in long rectangular microchannel," ASME J. Elect. Pkg., Vol. 133, pp. 021008-1 to 11, 2011.

Memon, N. and Jaluria, Y., "Flow structure and heat transfer in a stagnation flow CVD reactor," J. Heat Transfer, Vol. 133, pp. 082501-1 to 6, 2011.

Lin, P.T., Gea, H.C. and Jaluria, Y., "A modified reliability index approach for reliability-based design optimization," J. Mech. Design, Vol. 133, pp. 044501-1 to 7, 2011.

Zhang, T., Jia, L., Li, C.W., Yang, L.X. and Jaluria, Y., "Experimental study on single-phase gas flow in microtubes," ASME J. Heat Transfer, Vol. 133, pp. 111703-1 to 6, 2011.

2012 Journal Articles

Back to the Top

Chahal, M., Celler, G.K., Jaluria, Y., and Jiang, W., "Thermo-optic characteristics and switching power limit of slow-light photonic crystal structures on a silicon-on-insulator platform," Optics Express, Vol. 20, pp. 4225-4231, 2012.

Sun, Z. and Jaluria, Y., "Convective Heat Transfer in Pressure-Driven Nitrogen Slip flows in Long Microchannels: The Effects of Pressure Work and Viscous Dissipation," Int. J. Heat Mass Transfer, Vol. 55, pp. 3488-3497, 2012.

Venkatasubbaiah, K. and Jaluria, Y., "Numerical simulation of enclosure fires with horizontal vents," Numerical Heat Transfer, Vol. 62, pp. 179-196, 2012.

Conti, A., Lorenzini, G., and Jaluria, Y., "Transient Conjugate Heat Transfer in Straight Microchannels," Int. J. Heat Mass Transfer, Vol. 55, pp. 7532-7543, 2012.

2013 Journal Articles

Back to the Top

Jaluria, Y., "Challenges in the accurate numerical simulation of practical thermal processes and systems," Int. J. Numerical Meth. Heat Fluid Flow, Vol. 23, pp. 158-175, 2013.

Song, W., Chahal, M., Celler, G.K., Jaluria, Y., Reed, G.T., and Jiang, W., "The influence of substrate on SOI photonic crystal thermo-optic devices," Optics Express, Vol. 21, pp. 4235-4243, 2013.

Zhang, J., Jaluria, Y., Zhang, T., and Jia, L., "Combined experimental and numerical study for multiple microchannel heat transfer system," Numerical Heat Transfer, Vol. 64, pp. 293-305, 2013.

Jaluria, Y., "Thermal Issues in Materials Processing," J. Heat Transfer, Vol. 135, pp. 061701-1 to 14, 2013.

VanderVeer, J. and Jaluria, Y., "Solution of an Inverse Convection Problem by a Predictor-Corrector Approach," Int. J. Heat Mass Transfer, Vol. 65, pp. 123-130, 2013.

2014 Journal Articles

Back to the Top

Zhang, J., Lin, P.T., and Jaluria, Y., "Design and Optimization of Multiple Microchannel Heat Transfer Systems," J. Thermal Sci. Eng. Appl., Vol. 6, 011004-1 to 10, 2014.

Zhang, J., Zhang, T., Prakash, S., and Jaluria, Y., "Experimental and numerical study of the transient electronic chip cooling by liquid flow in microchannel heat sink," Numerical Heat Transfer, Vol. 65, pp. 627-643, 2014.

VanderVeer, J. and Jaluria, Y., "Optimization of an inverse convection solution strategy," Int. J. Heat Mass Transfer, Vol. 73, pp. 664-670, 2014.

Jaluria, Y., "Numerical modeling of multiple length scales in thermal transport processes," Int. J. Num. Meth. Heat Fluid Flow, Vol. 24, pp. 781-796, 2014.

Zhang, T.T., Zhang, T., Jia, L., and Jaluria, Y., "Numerical simulation of fluid flow and heat transfer in U-shaped microchannels," Numerical Heat Transfer, Vol. 66, pp. 217-228, 2014.

2015 Journal Articles

Back to the Top

George, P., Meng, J. and Jaluria, Y., "Optimization of Gallium Nitride metalorganic chemical vapor deposition process," J. Heat Transfer, Vol. 137, pp. 061007-1 to 8, 2015.

Meng, J., Wong, S., and Jaluria, Y., "Fabrication of GaN films in a chemical vapor deposition reactor," ASME J. Therm. Sys. Eng. App., Vol. 7, pp. 021003-1 to 9, 2015.

Meng, J. and Jaluria, Y., "Transient behavior of thin film deposition: Coupling micro and macroscale transport," Numerical Heat Transfer, Vol. 68, pp. 355-368, 2015.

VanderVeer, J. and Jaluria, Y., "Solution of the inverse jet in a crossflow problem by a predictor-corrector technique," Int. J. Heat Mass Transfer, Vol. 89, pp. 929-936, 2015.

Rossmann, T., Knight, D.D. and Jaluria, Y., “Data assimilation optimization for the evaluation of inverse mixing and convection flows,” Fluid Dynamics Research, Vol. 47, 2015.

2016 Journal Articles

Back to the Top

Wong, S. and Jaluria, Y., “Numerical simulation of a practical chemical vapor deposition reactor,” Numerical Heat Transfer, Vol. 70, pp. 1057-1071, 2016.

Jaluria, Y., “Heat and mass transfer in materials processing and manufacturing,” Adv. Heat Transfer, Vol. 48, pp. 1-94, 2016.

2017 Journal Articles

Back to the Top

Jaluria, Y., “Multiscale modeling in thermal materials processing,” Applied Thermal Eng., Vol. 111, pp. 1574-1580, 2017.

Jaluria, Y., “Simulation of thermal transport processes to reduce environmental impact and improve output,” Int. J. Comp. Meth. Exp. Meas., Vol. 5, pp. 23-33, 2017.

Zhang, J. and Jaluria, Y., “Steady and transient behavior of data centers with variations in thermal load and environmental conditions,” Int. J. Heat Mass Transfer, Vol. 108, pp. 374-385, 2017.

Tamm, G. and Jaluria, Y., “Flow of hot gases in vertical shafts under natural and forced ventilation,” Int. J. Heat Mass Transfer, Vol. 114, pp. 337-353, 2017.

Lin, P.T., Manuel, M.C.E., Zhang, J.R., Jaluria, Y. and Gea, H.C., “Multi-objective design optimization of multiple microchannel heat transfer systems based on multiple prioritized preferences, “ J. Therm. Sci. Eng. App., Vol. 9, 2017.

2018 Journal Articles

Back to the Top

Jaluria, Y., “Combined experimental and numerical approach to model, design and optimize thermal processes,” Int. J. Comp. Meth. Exp. Meas., Vol. 6 (4), pp. 625-634, 2018.

Tabrizi, A.B. and Jaluria, Y., “An optimization strategy of the inverse solution of a convection heat transfer problem,” Int. J. Heat Mass Transfer, Vol. 124, pp. 1147-1155, 2018.

Zhang, X. and Jaluria, Y., “Optimization of Microchannel-based Cooling Systems,” Numerical Heat Transfer, Vol. 74, pp. 1053-1067, 2018.

2019 Journal Articles

Back to the Top

Tabrizi, A.B. and Jaluria, Y., “A study of transient wall plume and its application in the solution of inverse problems,” Numerical Heat Transfer, Vol. 75, pp. 149-166, 2019.

Jumaah, O. and Jaluria, Y., “The effect of carrier gas and reactor pressure on Gallium Nitride growth in MOCVD manufacturing process,” J. Heat Transfer, Vol. 141, pp. 082101-1 to 12, 2019.

Jaluria, Y., “Optimization of thermal systems to reduce energy consumption and environmental impact,” Tecnica Italiana – Italian J. Eng. Sci., Vol. 63, pp. 1-12. 2019.

Zhai, D.J., Zhu, R., Jaluria, Y., and Jiang, W., “Analysis of silicon channel waveguide thermo-optic switches by the image charge method,” IEEE Photonics Tech. Lett., Vol. 31, pp. 635-638, 2019.

2020 Journal Articles

Back to the Top

Jaluria, Y., “Solution of inverse problems in thermal systems,” J. Thermal Sci. Eng. Appl., Vol. 12, pp. 011005-1 to 11, 2020.

Wong, S. and Jaluria, Y., “Numerical and experimental study on the fabrication GaN films by chemical vapor deposition,” J. Manu. Sci. Eng., Vol. 142, pp. 011001-1 to 14, 2020.

Zhang, X. and Jaluria, Y., “Reliability-based optimization and design limits of thermal systems: microchannel cooling systems,” Int. J. Heat Mass Transfer, Vol. 149, pp. 119202, 2020.

Jaluria, Y., Sunder, A. and Benner, J.Z., “Thermal management of data centers under steady and transient conditions,” Frontiers Heat Mass Transfer, Vol. 15, Art. No. 12, 2020.

2021 Journal Articles

Back to the Top

Jaluria, Y., “Strategies for solving inverse problems in thermal processes and systems,” Int. J. Num. Meth. Heat Fluid Flow, Vol. 31(10), pp. 3073-3088, 2021.

Tabrizi, A.B. and Jaluria, Y., “Application of steady-state turbulent flow data in the solution of inverse natural heat convection problems,” Int. J. Heat Mass Transfer, Vol. 164, Article 120553, 2021.

Jumaah, O.D. and Jaluria, Y., “Influence of precursor concentration on crystalline quality of GaN thin films grown on a sapphire wafer,” J. Manu. Sci. Eng., Vol. 143, pp. 111001-1 to 9, 2021.

Jumaah, O.D. and Jaluria, Y., “Experimental study of the effect of precursor composition on the microstructure of GaN thin films grown by the MOCVD process,” J. Heat Transfer, Vol. 143, pp. 102201-1 to 11, 2021

Selected International Conference Papers

Back to the Top

Jaluria, Y., "Natural convection flow due to line thermal sources on a vertical adiabatic surface," Proc. 7th Int. Heat Transfer Conf., Munich, Hemisphere Pub. Co., Washington, D.C., Vol. 2, pp. 147-152, 1982.

Goel S. and Jaluria, Y., "Thermal transport from an isolated heat source on a vertical or inclined surface," Proc. 8th Int. Heat Transfer Conf., San Francisco, Hemisphere Pub. Corp., N.Y., Vol. 3, pp. 1341-1346, 1986.

Jaluria, Y., "Buoyancy-driven wall flows in enclosure fires," Proc. 21st. Sym. (Int.) Combust., Combust. Inst., Pittsburgh, PA, 151-157, 1986.

Lee, S.H.-K. and Jaluria, Y., "The effects of variable viscosity and viscous dissipation on the flow and thermal transport during optical fiber drawing," Proc. 10th Int. Heat Transfer Conf., UK, Vol. 7, pp. 303-308, 1994.

Chiu, W. K.-S. and Jaluria, Y., "Heat and mass transfer in continuous CVD reactors," Proc. 11th Int. Heat Transfer Conf., Kyungju, Korea, Vol. 5, pp. 187-192, 1998.

Tamm, G.O. and Jaluria, Y., "Buoyancy and pressure induced flow of hot gases in vertical shafts," Proc. 12th Int. Heat Transfer Conf., Grenoble, France, 2002.

Cheng, X. and Jaluria, Y., "Thermal design of draw furnace in optical fiber manufacturing," Proc. 12th Int. Heat Transfer Conf., Grenoble, France, 2002.

Yang, J. and Jaluria, Y., "Numerical Modelling of Hollow Fiber Drawing," Proc. 13th Int. Heat Transfer Conf., Sydney, Australia, 2006.

George, P., Jaluria, Y. and Gea, H.C., "Optimization of the Chemical Vapor Deposition Process for the Fabrication of Thin Films," Proc. 13th Int. Heat Transfer Conf., Sydney, Australia, 2006.

Sun, Z. and Jaluria, Y., "Pressure-driven gas flows in long rectangular microchannels with uniform heat flux boundary conditions," 14th Int. Heat Transfer Conf., Washington, DC, 2010.

Memon, N. and Jaluria, Y., "Flow structure and heat transfer in stagnation flow CVD reactor," 14th Int. Heat Transfer Conf., Washington, DC, 2010.

Zhang, J., Jaluria, Y., Zhang, T., and Jia, L., "Combined experimental and numerical study for multiple microchannel heat transfer system," 14th Int. Heat Transfer Conf., Washington, DC, 2010.

Zhang, J., Prakash, S., Jaluria, Y., and Lin, L., "An experimental study on the effect of configuration of multiple microchannels on heat removal for electronic cooling," 14th Int. Heat Transfer Conf., Washington, DC, 2010.

George, P., Meng, J. and Jaluria, Y., "Optimization of the chemical vapor deposition process for Gallium Nitride," 15th Int. Heat Transfer Conf., Kyoto, Japan, 2014.

Davaa, G., Jambal1, O. and Jaluria, Y., "Fluid flow and heat transfer in microchannel heat sinks with zigzag longitudinal fins," 15th Int. Heat Transfer Conf., Kyoto, Japan, 2014.

Keynote Papers

Back to the Top

Jaluria, Y., "Nonlinear disturbance growth and transition in natural convection flows," in Stability in Convective Flows, Eds. W.S. Saric and A.A. Szewczyk, ASME Publication HTD -Vol. 54, pp. 1-9, 1985

Jaluria, Y. "Computational study of external and internal convective flows with significant buoyancy effects," in Computational Mechanics '88, Eds. S.N. Atluri and G. Yagawa, Springer-International, 55.vi.1-4, 1988.

Jaluria, Y. and Karwe, M.V., "Numerical simulation of screw extrusion process for plastic materials," in Adv. Comput. Meth. Heat Transfer, Eds. L.C. Wrobel, C.A. Brebbia and A.J. Nowak, Computational Mechanics Pub., Southampton, U.K., Vol. 2, pp. 333-349, 1990.

Jaluria, Y.," Heat and mass transfer in the screw extrusion process for non-Newtonian fluids," in Proc. Int. Symp. Manufacturing & Materials Processing, Dubrovnik, Yugoslavia, 1990. Published by Begell House, Inc., New York, Vol. 1, pp. 3-22, 1997.

Jaluria, Y., "Numerical simulation of transport in the extrusion of non-Newtonian materials," in Computational Mech. '91, Eds. S.N. Atluri, D.E. Beskos, R. Jones and G. Yagawa, ICES Pub., Atlanta, GA, pp. 407-413, 1991.

Papanicolaou, E. and Jaluria, Y., "Conjugate mixed convection from thermal sources in a rectangular cavity," in Computational Mech. '91, Eds. S.N. Atluri, D.E. Beskos, R. Jones and G. Yagawa, ICES Pub., Atlanta, GA, pp. 827-831, 1991.

Jaluria, Y., "Numerical simulation of turbulent convective transport in a partially open enclosure," in Computational Mechanics '92, Eds. S.N. Atluri, G. Yagawa, P. Tong and R. Jones, Technology Pubs., Atlanta, GA, p. 223, 1992.

Abib, A.H., Jaluria, Y. and Karwe, M.V., "Heat and mass transfer in the extrusion of food materials," in Heat and Mass Transfer 95, Eds. S. Srinivasa Murthy and Y. Jaluria, Tata McGraw-Hill Pub. Co., New Delhi, India, pp. 61-70, 1996.

Jaluria, Y., "Numerical modeling of materials processing systems," in Advances Computational Engg. Sci., Eds. S.N. Atluri and G. Yagawa, Tech Science Press, Forsyth, GA, pp. 855- 866, 1997.

Jaluria, Y., "Transport processes in polymer extrusion and optical fiber drawing," in CHT’97: Advances in Computational Heat Transfer, Eds. G. de Vahl Davis and E. Leonardi, Begell House, Inc., New York, pp. 22-37, 1998.

Jaluria, Y., "Heat and Mass Transfer in the Thermal Processing of Advanced Materials," in Heat Transfer 1998, Proc. 11th IHTC, Taylor & Francis, Philadelphia, PA, Vol. 1, pp. 189-211, 1998.

Jaluria, Y., "Numerical modeling of thermal materials processing systems," in Proc. ASME Fluids Engg. Div. -1999, FED Vol. 250, pp. 137-148, 1999.

Jaluria, Y., "Numerical simulation of thermal transport in complicated domains with strong material property changes," in Proc. 7th Int. Conf. Advanced Comput. Meth. Heat Transfer, Halkidiki, Greece, April 2002.

Jaluria, Y., "Thermal processing of materials: From basic research to engineering - The 2002 Max Jakob Memorial Award Lecture," Proc. ASME Summer Heat Transfer Conf., Las Vegas, NV, 2003.

Jaluria, Y., "Buoyancy-induced flows in nature and in technology – The 2003 Robert Henry Thurston Lecture," Int. Mech. Engg. Cong. & Expo., Washington, DC, 2003.

Jaluria, Y., "Numerical simulation of complex transport phenomena arising in practical thermal systems," Proc. Eurotherm 82, Num. Heat Transfer 2005, Krakow, Poland, September 2005.

Jaluria, Y., "Simulation, design and optimization of thermal systems," 24th National Heat Transfer Conference UIT, Naples, Italy, June 2006.

Jaluria, Y., "Experimental data driven simulation of convective transport," ICHMT International Symposium on Advances in Computational Heat Transfer, Marrakech, Morocco, May 11-16, 2008.

Jaluria, Y., "Shear and pressure driven flow and thermal transport in microchannels," 6th Int. ASME Conf. Nano., Micro. and Minichannels, Darmstadt, Germany, June 2008.

Jaluria, Y., " Microscale transport in the thermal processing of new and emerging advanced materials," Proc. Thermal Issues in Emerging Technologies, ThETA 2, Cairo, Egypt, pp. 129-141, 2008.

Jaluria, Y., " Role of experiments in the accurate numerical simulation of thermal processes," Proc. 1st Int. Conf. Comput. Meth. Thermal Problems, Naples, Italy, pp. 17-40, 2009.

Jaluria, Y., "Microscale transport phenomena in thermal materials processing," Proc 5th Int. Conf. Thermal Engg.: Theory and Applications, Marrakesh, Morocco, May 10-14, 2010.

Jaluria, Y., "Use of experimentation in the accurate numerical simulation of thermal processes" Proc. 11th Int. Conf. Adv. Comput. Meth. Exptl. Meas. Heat Mass Transfer, Tallinn, Estonia, July 2010, Eds. Sunden, B., Mander, U. and Brebbia, C.A., WIT Press, UK, pp. 241-252, 2010.

Jaluria, Y., "Numerical simulation of shear and pressure driven flow in microchannels," Proc. 7th Int. Conf. Engg. Comput. Tech., Valencia, Spain, Sept. 2010, Eds. Topping, B.H.V., Adam, J.M., Pallares, F.J., Bru, R. and Romero, M.L., Saxe-Coburg Pubs., U.K., pp. 149-182, 2010.

Jaluria, Y., "Challenges in the Accurate Numerical Simulation of Practical Thermal Processes and Systems," 2nd Int. Conf. on Computational Methods for Thermal Problems, Dalian, China, September 2011.

Jaluria, Y., "Optimization of Thermal Systems for Energy Conservation and Reduced Environmental Impact," Chinese National Heat Transfer Conf., Xi'an, China, October 2011.

Jaluria, Y., " Transport Phenomena in Thin Film Deposition and in Microchannel Flow," ASME 3rd Micro/Nanoscale Heat & Mass Int. Conf., Atlanta, GA, March 2012.

Jaluria, Y., "Numerical Modeling of Multiple Length Scales in Thermal Transport Processes," Numerical Heat Transfer 2012 Int. Conf. (NHT2012), Wroclaw, Poland, September 2012.