Last Updated on: May 2021
Benjamin Glasser's Publications 1 . Kottlan, A., Glasser, B.J., and Khinast, J.G., Vibratory Mixing of Pharmaceutical Powders on a Single-Tablet-Scale, Powder Technology, 387, 385-395, (2021). 2 . Hartmanshenn, C., Halota, M., Chaksmithanont, P., Leung, C., Khinast, J.G., Papageorgiou, C.D., Mitchell, C., Quon, J., and Glasser, B.J., Scale Up of Heat Transfer for Dry Granular Material in a Cylindrical Bladed Mixer, Powder Technology, 385, 336-347, (2021). 3 . Chen, I.Y., Navodia, S., Yohannes, B., Nordeck, L., Machado, B., Ardalani, E., Borghard, W.G., Glasser, B.J., Cuitino, A.M., Flow of a Moderately Cohesive FCC Catalyst in Two Pilot-Scale Rotary Calciners: Residence Time Distribution and Bed Depth Measurements with and without Dams, Chemical Engineering Science, 230, 116211, 1-16, (2020). 4 . Fathollahi, S., Faulhammer, E., Glasser, B.J., and Khinast, J.G., Impact of Powder Composition on Processing-relevant Properties of Pharmaceutical Materials: An Experimental Study, Advanced Powder Technology, 31, 2991-3003, (2020). 5 . Chen, H., Diep, E., Langrish, T.A.G., and Glasser, B.J., Continuous Fluidized Bed Drying: Residence Time Distribution Characterization and Effluent Moisture Content Prediction, AIChE Journal, 66, e16902, 1-13, (2020). 6 . Hartmanshenn, C., Khinast, J.G., Papageorgiou, C.D., Mitchell, C., Quon, J., and Glasser, B.J., Heat Transfer of Dry Granular Materials in a Bladed Mixer: Effect of Thermal Properties and Agitation Rate, AIChE Journal, 66, e16861, 1-15, (2020). 7 . Omar, T.A., Oka, S., Muzzio, F.J., and Glasser, B.J., Manufacturing of Pharmaceuticals by Impregnation of an Active Pharmaceutical Ingredient onto a Mesoporous Carrier: Impact of Solvent and Loading, Journal of Pharmaceutical Innovation, 14, 194-205, (2019). 8 . Noorithaya, A.V., Bishop, C., Sarkar, P., Khinast, J.G., and Glasser, B.J., Drying of Supported Catalysts for High Metal Concentrations: A Reduced Parameter Model, Chemical Engineering Science, 206, 361-374, (2019). 9 . Grigorov, P.I., Muzzio, F.J., and Glasser, B.J., Modeling Fluidized Bed Impregnation of Active Pharmaceutical Ingredients onto Porous Excipients, Chemical Engineering Science, 202, 36-54, (2019). 1 0 . Govender, N., Rajamani, R., Wilke, D.N., Wu, C.-Y., Khinast, J.G., Glasser, B.J., Effect of Particle Shape in Grinding Mills using a GPU Based DEM Code, Minerals Engineering, 129, 71-84, (2018). 1 1 . Boonkanokwong, V., Frank, R.P., Valliappan, P., Remy, B., Khinast, J.G., and Glasser, B.J., Flow of Granular Materials in a Bladed Mixer: Effect of Particle Properties and Process Parameters on Impeller Torque and Power Consumption, Advanced Powder Technology, (2018). 1 2 . Chen, H., Rustagi, S., Diep, E., Langrish, T.A.G., Glasser, B.J., Scale-up of Fluidized Bed Drying: Impact of Process and Design Parameters, Powder Technology, 339, 8-16, (2018). 1 3 . Govender, N., Wilke, D.N., Wu, C.-Y., Rajamani, R., Khinast, J.G., Glasser, B.J., Large-scale GPU based DEM modeling of mixing using irregularly shaped particles, Advanced Powder Technology, 29, 2476-2490, (2018). 1 4 . Paredes, I.J., Yohannes, B., Emady, H.N., Muzzio, F.J., Maglio, A., Borghard, W.G., Glasser, B.J., and Cuitino, A.M., Measurement of the Residence Time Distribution of a Cohesive Powder in a Flighted Rotary Kiln, Chemical Engineering Science, 191, 56-66, (2018). 1 5 . Grigorov, P.I., Glasser, B.J., and Muzzio, F.J., Cross-Sectional Analysis of Impregnated Excipient Particles by Energy Dispersive X-ray Spectroscopy, Powder Technology, 332, 197-209, (2018). 1 6 . Ebrahimi, M., Siegmann, E., Prieling, D., Glasser, B.J., and Khinast, J.G., An Investigation of the Hydrodynamic Similarity of Single-Spout Fluidized Beds using CFD-DEM Simulations, Advanced Powder Technology, 28, 2465-2481, (2017). 1 7 . Chen, H., Liu, X., Bishop, C., Glasser, B.J., Fluidized Bed Drying of Pharmaceutical Powder: A Parametric Investigation of Drying of Dibasic Calcium Phosphate, Drying Technology, 35, 1602-1608, (2017). 1 8 . Paredes, I.J., Yohannes, B., Glasser, B.J., Borghard, W.G., Emady, H.N., Muzzio, F.J., Beeckman, J., Ilias, S., Podsiadlo, P., Jezek, E., Baumgartner, J., Cuitino, M.A., The Effect of Operating Conditions on the Residence Time Distribution and Axial Dispersion Coefficient of a Cohesive Powder in a Rotary Kiln, Chemical Engineering Science, 158, 50-57, (2017). 1 9 . Wang, Y., Li, T. , Muzzio, F.J., Glasser, B.J., Predicting Feeder Performance Based on Material Flow Properties, Powder Technology, 308, 135-148, (2017). 2 0 . Grigorov, P.I., Glasser, B.J. and Muzzio, F.J., Improving Dissolution Kinetics of Pharmaceuticals by Fluidized Bed Impregnation of Active Pharmaceutical Ingredients, AICHE Journal, 62, 4201-4214, (2016). 2 1 . Koynov, S., Muzzio, F.J., Glasser, B.J., A Novel Consolidation Method to Measure Powder Flow Properties using a Small Amount of Material, AICHE Journal, 62, 4193-4200, (2016). 2 2 . Yohannes, B., Emady, H.N., Anderson, K., Pardes, I.J., Javed, M., Borghard W., Muzzio, F.J., Glasser, B.J., Cuitino, A.M, Scaling of Heat Transfer and Temperature Distribution of Granular Flows in Rotating Drums, Physical Review E, 94, 042902, 1-5, (2016). 2 3 . Boonkanokwong, V., Remy, B., Khinast, J.G., and Glasser, B.J., The effect of the number of impeller blades on granular flow in a bladed mixer, Powder Technology, 302, 333-349, (2016). 2 4 . Wu, S., Panikar, S.S., Singh, R., Zhang, J., Glasser, B.J., Ramachandran, R., A Systematic Framework to Monitor Mulling Processes using Near Infrared Spectroscopy, Advanced Powder Technology, 27, 1115-1127, (2016). 2 5 . Emady, H.N., Anderson, K.V., Borghard, W.G., Muzzio, F.J., Glasser, B.J., Cuitino. A., Prediction of Conductive Heating Time Scales of Particles in a Rotary Drum, Chemical Engineering Science, 152, 45-54, (2016). 2 6 . Wang, Y., Koynov, S., Glasser, B.J., Muzzio, F.J., A Method to Analyze Shear Cell Data of Powders Measured under Different Initial Consolidation Stresses, Powder Technology, 294, 105-112, (2016). 2 7 . Adepu, M., Hate, S., Bétard, A., Oka, S., Schongut, M., Sen, M., Sood, Y., Wolf, D., Wieland, S., Stepanek, F., Muzzio, F., Glasser, B.J., Ramachandran, R., Quantitative Validation and Analysis of the Regime Map Approach for the Wet Granulation of Industrially Relevant Zirconium Hydroxide Powders, Powder Technology, 294, 177-184, (2016). 2 8 . Koynov, S., Wang, Y., Redere, A., Amin, P., Emady, H.N., Muzzio, F.J., Glasser, B.J., Measurement of the Axial Dispersion Coefficient of Powders in a Rotating Cylinder: Dependence on Bulk Flow Properties, Powder Technology, 292, 298-306, (2016). 2 9 . Scicolone, J.V., Metzger, M.J., Anderson, K.V., Koynov, S., Glasser, B.J., and Muzzio, F.J., Effect of Liquid Addition on the Bulk and Flow Properties of Fine and Coarse Glass Beads, AIChE Journal, 62, 648-658, (2016). 3 0 . Emady, H.N., Wittman, M., Koynov, S., Borghard, W.G., Muzzio, F.J., Glasser, B.J., Cuitino. A., A Simple Color Concentration Measurement Technique for Powders, Powder Technology, 286, 392-400, (2015). 3 1 . Koynov, S., Glasser, B.J., and Muzzio, F.J., Comparison of Three Rotational Shear Cell Testers: Powder Flowability and Bulk Density, Powder Technology, 283,103-112, (2015). 3 2 . Schrank, S., Kann, B., Saurugger, E., Hainschitz, M., Windbergs, M., Glasser, B.J., Khinast, J.G., Roblegg, E., The Effect of the Drying Temperature on the Properties of Wet-extruded Calcium Stearate Pellets: Pellet Microstructure, Drug Distribution, Solid State and Drug Dissolution, International Journal of Pharmaceutics, 478, 779-787, (2015). 3 3 . Remy, B., Saurer, E., Kightlinger, W., Domagalski, N. and Glasser, B.J., Scale-up of Agitated Drying: Effect of Shear Stress and Hydrostatic Pressure on API Powder Properties, AIChE Journal, 61, 407-418, (2015). 3 4 . Liu, X., Khinast, J.G. and Glasser, B.J., Drying of Ni/Alumina Catalysts: Control of the Metal Distribution Using Surfactants and the Melt Infiltration Method, I&ECR, 53, 5792-5800, (2014). 3 5 . Schrank, S., Kann, B., Saurugger, E., Ehmann, H., Werzer, O., Windbergs, M., Glasser, B.J., Zimmer, A., Khinast, J.G., Roblegg, E., Impact of Drying on Solid State Modifications and Drug Distribution in Ibuprofen-Loaded Calcium Stearate Pellets, Molecular Pharmaceutics, 11, 599-609, (2014). 3 6 . Heigl, N., Koller, D.M., Glasser, B.J., Muzzio, F.J., Khinast, J. G., Quantitative On-line vs. Off-line NIR Analysis of Fluidized Bed Drying with Consideration of the Spectral Background, European Journal of Pharmaceutics and Biopharmaceutics, 85, 1064-1074, (2013). 3 7 . Schrank, S., Birthe, K., Windbergs, M., Glasser, B.J., Zimmer, A., Khinast, J., Roblegg, E., Microstructure of Calcium Stearate Matrix Pellets: A Function of the Drying Process, Journal of Pharmaceutical Sciences, 102, 3987-3997, (2013). 3 8 . Grigorov, P.I., Glasser, B.J. and Muzzio, F.J., Formulation and Manufacture of Pharmaceuticals by Fluidized Bed Impregnation of Active Pharmaceutical Ingredients onto Porous Carriers, AIChE Journal, 59, 4538-4552, (2013). 3 9 . Gao, Y., Glasser, B.J., Ierapetritou, M.G., Cuitino, A., Muzzio, F.J., Beeckman, J.W., Fassbender, N.A., and Borghard, W.G., Measurement of Residence Time Distribution in a Rotary Calciner, AIChE Journal, 59, 4068-4076, (2013). 4 0 . Scheibelhofer, O., Balak, N., Wahl, P., Koller, D.M., Glasser, B.J., and Khinast, J.G. Monitoring Blending of Pharmaceutical Powders with Multi-point NIR Spectroscopy, AAPS PharmSciTech, 14, 234-244, (2013). 4 1 . Vasilenko, A., Koynov, S., Glasser, B.J. and Muzzio, F.J., Role of Consolidation State in the Measurement of Bulk Density and Cohesion, Powder Technology, 239, 366-373, (2013). 4 2 . Metzger, M.J., Glasser, B.J., Patel, B.,Fox, J.,Sempuga, C., Hildebrandt, D., and Glasser, D., Liquid Fuels from Alternative Carbon Sources Minimizing Carbon Dioxide Emissions, AIChE Journal, 59, 2062-2078, (2013). 4 3 . Jain, A., Metzger, M.J., Glasser, B.J., Effect of Particle Size Distribution on Segregation in Vibrated Systems, Powder Technology, 237, 543-553, (2013). 4 4 . Metzger, M.J., Glasser, B.J., Simulation of the Breakage of Bonded Agglomerates in a Ball Mill, Powder Technology, 40, 304-314, (2013). 4 5 . Metzger, M.J., Glasser, B.J., Patel, B., Hildebrandt, D., and Glasser D. Teaching Process Design through Integrated Process Synthesis, Chemical Engineering Education, 46:4, 260-270, (2012). 4 6 . Remy, B., Khinast, J.G. and Glasser, B.J., Wet Granular Flows in a Bladed Mixer: Experiments And Simulations of Monodisperse Spheres, AIChE Journal, 58, 3354–3369, (2012). 4 7 . Metzger, M.J., Desai, S.P., Glasser, D., Hildebrandt, D., Glasser, B.J., Using the Attainable Region Analysis to Determine the Effect of Process Parameters on Breakage in a Ball Mill, AIChE Journal, 58, 2665–2673, (2012). 4 8 . Thyagu, N.N., Vasilenko, A., Voyiadjis, A., Glasser, B.J., Shinbrot, T, Stuck in Traffic: Patterns of Powder Adhesion, The European Physical Journal E, 35, 1-5, (2012). 4 9 . Liu, X., Khinast, J.G. and Glasser, B.J., Drying of Supported Catalysts for Low Melting Point Precursors: Impact of Metal Loading and Drying Methods on the Metal Distribution, Chem. Eng. Sci., 79, 187-199, (2012). 5 0 . Schrank, S. Hodzic, A., Zimmer, A., Glasser, B.J., Khinast, J.G., Roblegg, E., Ibuprofen-Loaded Calcium Stearate Pellets: Drying-Induced Variations in Dosage Form Properties, AAPS PharmSciTech, 13, 686-98, (2012). 5 1 . Radl, S., Brandl, D., Heimburg, H., Glasser, B.J., Khinast, J.G. Flow and Mixing of Granular Material over a Single Blade, Powder Technology, 226, 199-212, (2012). 5 2 . Suzzi, D., Toschkoff, G., Radl, S., Machold, D., Fraser, S.D. Glasser, B.J., Khinast J.G. DEM Simulation of Continuous Tablet Coating: Effects of Tablet Shape and Fill Level on Inter-Tablet Coating Variability, Chem. Eng. Sci., 69, 107-121, (2012). 5 3 . Metzger, M.J., Glasser, B.J., Numerical Investigation of the Breakage of Bonded Agglomerates during Impact, Powder Technology, 217, 304-314, (2012). 5 4 . Siraj, M.S., Radl, S., Glasser, B.J., Khinast, J.G., Effect of Blade Angle and Particle Size on Powder Mixing Performance in a Rectangular Box, Powder Technology, 211, 100-113, (2011). 5 5 . Remy, B., Khinast, J.G. and Glasser, B.J., Polydisperse Granular Flows in a Bladed Mixer: Experiments and Simulations of Cohesionless Spheres, Chem. Eng. Sci., 66, 1811-1824, (2011). 5 6 . Vasilenko, A., Glasser, B.J. and Muzzio, F. J., Shear and Flow Behavior of Pharmaceutical Blends - Method Comparison Study, Powder Technology, 208, 628-636, (2011). 5 7 . Metzger, M., Remy, B. and Glasser, B.J., All the Brazil nuts are Not on Top: Vibration Induced Granular Size Segregation of Binary, Ternary and Multi-sized Mixtures, Powder Technology, 205, 42-51, (2011). 5 8 . Radeke, C.A., Glasser, B.J., and Khinast, J.G.,Large-scale Powder Mixer Simulations Using Massively Parallel GPU Architectures, Chem. Eng. Sci., 65, 6435-6442, (2010). 5 9 . Remy, B., Canty, T.M., Khinast, J.G. and Glasser, B.J., Experiments and Simulations of Cohesionless Particles with Varying Roughness in a Bladed Mixer, Chem. Eng. Sci., 65, 4557-4571, (2010). 6 0 . Radl, S., Kalvoda, E., Glasser, B.J. and Khinast, J.G., Mixing Characteristics of Wet Granular Matter in a Bladed Mixer, Powder Technology, 200, 171-189 (2010). 6 1 . LaMarche, K., Muzzio, F.J., Shinbrot, T. and Glasser, B.J., Granular Flow and Dielectrophoresis: The Effect of Electrostatic Forces on Adhesion and Flow of Dielectric Granular Materials, Powder Technology, 199, 180-188 (2010). 6 2 . LaMarche, K., Metzger, M., Glasser, B.J. and Shinbrot, T., Shape-Mediated Ordering in Granular Blends, Physical Review E, 81, 052301 (2010). 6 3 . Liu, X., Khinast, J.G. and Glasser, B.J., Drying of Supported Catalysts: A Comparison of Model Predictions and Experimental Measurements, I&ECR, 49, 2649-2657 (2010). 6 4 . Remy, B., Khinast, J.G. and Glasser, B.J., The Effect of Mixer Properties and Fill Level on Granular Flow in a Four-Bladed Mixer, AIChE J., 56, 336-353, (2010). 6 5 . Glasser, D., Hildebrandt, D., Hausberger, B., Patel, B. and Glasser, B. J., Systems Approach to Reducing Energy Usage and Carbon Dioxide Emissions, AICHE J., 55, 2202-2207, (2009). 6 6 . Metzger, M.J., Glasser, D., Hausberger, B., Hildebrandt, D. and Glasser, B.J., Use of the Attainable Region Analysis to Optimize Particle Breakage in a Ball Mill, Chemical Engineering Science, 64, 3766-3777, (2009). 6 7 . Remy, B., Khinast, J.G. and Glasser, B.J., Discrete Element Simulation of Free Flowing Grains in a Four-Bladed Mixer, AICHE J., 55, 2035-2048, (2009). 6 8 . LaMarche, K.R., Shah, S.K., Liu, X., Shinbrot, T. and Glasser, B.J., Electrostatic charging during the flow of grains from a cylinder, Powder Technology, 195, 158-165, (2009). 6 9 . Hildebrandt, D., Glasser, D., Hausberger, B., Patel, B. and Glasser, B. J., Producing Transportation Fuels with Less Work, Science, 323, 1680-1681, (2009). 7 0 . Liu, X., Metzger, M. and Glasser, B.J., Granular and Gas-Particle Flows in a Channel with a Bidisperse Particle Mixture, Chemical Engineering Science, 63, 5696-5713, (2008). 7 1 . Liu, X., Khinast, J.G. and Glasser, B.J., A Parametric Investigation of Impregnation and Drying of Supported Catalysts, Chem. Eng. Sci., 63, 4517-4530, (2008). 7 2 . Liu, X., Howley, M.A., Johri, J. and Glasser, B.J., The hydrodynamic stability of a fluid-particle flow: instabilities in gas- fluidized beds, Chemical Engineering Education, 42:4, 179-184, (2008). 7 3 . Liu, X., Metzger, M. and Glasser, B.J., Couette Flow with a Bidisperse Particle Mixture, Phys. Fluids, 19, 073301, (2007). 7 4 . LaMarche, K., Conway, S.L., Glasser, B.J., and Shinbrot, T, Cellular Automata Model of Gravity-driven Granular Flows, Granular Matter, 9, 219-229, (2007). 7 5 . Liu, X., Howley, M.A., Glasser, B.J., Instability of Bounded Gas-Particle Fluidized Beds, AIChE J., 53, 811-824, (2007). 7 6 . Metzger, M., Glasser, B.J., Glasser, D., Hausberger, B., Hildebrandt, D., Teaching Reaction Engineering Using the Attainable Region, Chemical Engineering Education, 41:4, 258-264, (2007). 7 7 . Raffensberger, J., Glasser, B.J. and Khinast, J.G., Effect of Droplet Wake Phenomena on Mixing-Sensitive Pharmaceutical Reactions, Pharm. Tech., 30:11, 66-79, (2006). 7 8 . Conway, S.L., Liu, X, and Glasser, B.J., Instability-induced clustering and segregation in high-shear Couette flows of model granular materials, Chem. Eng. Sci., 61, 6404-6423, (2006). 7 9 . Lekhal, A., Conway, S.L., Glasser, B.J., and Khinast J.G., Characterization of Granular Flow of Wet Solids in a Bladed Mixer, AIChE J., 52, 2757-2766, (2006). 8 0 . Caicedo-Carvajal, C., Glasser, B.J. and Shinbrot, T, Granular Flow Transitions on Sinusoidal Surfaces, J. Fluid Mech., 556, 253-269, (2006). 8 1 . Shinbrot, T, LaMarche, K., and Glasser, B.J., Triboelectrification and Razorbacks: geophysical patterns produced in dry grains, Phys. Rev. Lett., 96, 178002, 1-4, (2006) . 8 2 . Liu, X., and Glasser, B.J., A Parametric Investigation of Gas-Particle Flow in a Vertical Duct, AIChE J., 52, 940 - 956, (2006). 8 3 . Conway, S.L., Lekhal, A., Khinast J.G., and Glasser, B.J., Granular Flow and Segregation in a Four-Bladed Mixer, Chem. Eng. Sci., 60, 7091-7107, (2005). 8 4 . Raffensberger, J., Glasser, B.J. and Khinast, J.G., Analysis of Heterogeneously Catalyzed Reactions at the Gas-Liquid Interface of Bubbles, AIChE J., 51, 1482-1496, (2005). 8 5 . Howley, M.A., and Glasser, B.J., A Comparison of One-dimensional Traveling Waves in Inverse and Normal Fluidized Beds, Physica D., 201, 177-198, (2005). 8 6 . Conway, S.L., Shinbrot, T., and Glasser, B.J., A Taylor Vortex Analogy in Granular Flows, Nature, 431, 433-437, (2004). 8 7 . Johri, J., and Glasser, B.J., A Bifurcation Approach to Understanding Instabilities in Gas-Fluidized Beds using a Single Phase Compressible Flow Model , Computers & Chemical Engineering, 28, 2677-2693, (2004). 8 8 . Conway, S.L., and Glasser, B.J., Density Waves and Coherent Structures in Granular Couette Flows, Phys. Fluids, 16, 509- 529, (2004). 8 9 . Lekhal, A., Glasser, B.J., and Khinast J.G., Influence of Ph and Ionic Strength on the Metal Profile of Impregnation Catalysts, Chem. Eng. Sci., 59, 1063-1077, (2004). 9 0 . Lekhal, A., Girard, K. P., Brown, M. A., Kiang, S., Khinast J. and Glasser, B.J., The Effect of Agitated Drying on the Morphology of L-Threonine (Needle-like) Crystals, Int. J. Pharmaceutics, 270, 263-277, (2004). 9 1 . Wright, P., Liu, X., and Glasser, B.J., A Fluidized Bed Adsorption Laboratory Experiment, Chemical Engineering Education, 38:1, 14-21, (2004). 9 2 . Liss, E., Conway, S.L., Zega, J.A., and Glasser, B.J., Segregation of Powders during Gravity Flow through Vertical Pipes, Pharm. Tech., 28:2, 78-96, (2004). 9 3 . Lekhal, A., Girard, K. P., Brown, M. A., Kiang, S., Glasser, B.J., and Khinast J., Impact Of Agitated Drying On Crystal Morphology: KCL-Water System, Powder Technology, 132, 119-130, (2003). 9 4 . Raffensberger, J., Koynov, A.A., Glasser, B.J. and Khinast, J.G. Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions, Int. J. Chemical Reactor Eng., 1, A15, 1-16, (2003). 9 5 . Conway, S.L., Goldfarb, D.J., Shinbrot, T., and Glasser, B.J., Free Surface Waves in Wall-Bounded Granular Flows, Phys. Rev. Lett., 90, 074301, 1-4, (2003). 9 6 . Howley, M., and Glasser, B.J., Hydrodynamics of a Uniform Liquid-Fluidized Bed containing a Binary Mixture of Particles, Chem. Eng. Sci., 57, 4209-4226, (2002). 9 7 . Liss, E., Conway, S.L. and Glasser, B.J., Density Waves in Gravity-Driven Granular Flows, Phys. Fluids, 14, 3309-3326 (2002). 9 8 . Johri, J., and Glasser, B.J., Connections between Density Waves in Fluidized Beds and Compressible Flows, AIChE J., 48, 1645-1664, (2002). 9 9 . Muzzio, F.J., Shinbrot, T. and Glasser B.J., Powder Technology in the Pharmaceutical Industry: The Need to Catch Up Fast, Powder Tech., 124, 1-7, (2002) (invited article). 1 0 0 . Goldfarb, D., Glasser, B.J., and Shinbrot, T., Shear Instabilities in Granular Flows, Nature, 415, 302-305, (2002). 1 0 1 . Glasser, B.J., Cole J., and Muzzio, F.J., A Comprehensive Approach to Pharmaceutical Engineering Training, Pharm. Tech., 25:12, 34-36, (2001). 1 0 2 . Lekhal, A., Khinast J.G., and Glasser, B.J., Predicting the Effect of Drying on Supported Co-Impregnation Catalysts, I&EC Research, 40, 3989-3999, (2001). 1 0 3 . Liss, E., and Glasser, B.J., The Influence of Clusters on the Stress in a Sheared Granular Material, Powder Tech., 116, 116- 132, (2001). 1 0 4 . Lekhal, A., Glasser, B.J., and Khinast J.G., Impact of Drying on the Catalyst Profile in Supported Impregnation Catalysts, Chem. Eng. Sci., 56, 4473-4487, (2001). 1 0 5 . Wright, P.R., and Glasser, B.J., Modeling Mass Transfer and Hydrodynamics in Fluidized Bed Adsorption of Proteins, AIChE J., 47, 474-488, (2001). 1 0 6 . Glasser, B.J., and Goldhirsch, I., Scale Dependence, Correlations and Fluctuations of Stresses in Rapid Granular Flows, Phys. Fluids, 13, 407-420, (2001). 1 0 7 . Wright, P.R., Muzzio, F.J., and Glasser, B.J., Effect of Resin Characteristics on Fluidized Bed Adsorption of Proteins, Biotechnol. Prog., 15, 932-940, (1999). 1 0 8 . Wright, P.R., Muzzio, F.J., and Glasser, B.J., Batch Uptake of Lysozyme: Effect of Solution Viscosity and Mass Transfer on Adsorption, Biotechnol. Prog., 14, 913-921, (1998). 1 0 9 . Glasser, B.J., Sundaresan, S., Kevrekidis, I.G., From Bubbles to Clusters in Fluidized Beds, Phys. Rev. Lett., 81, 1849-1852, (1998). 1 1 0 . Glasser, B.J., Kevrekidis, I.G. and Sundaresan, S., Fully-developed Traveling Wave Solutions and Bubble Formation in Fluidized Beds, J. Fluid Mech., 334, 157-188, (1997). 1 1 1 . Glasser, B.J., Kevrekidis, I.G. and Sundaresan, S., One- and Two-dimensional Traveling Wave Solutions in Gas-Fluidized Beds, J. Fluid Mech., 306, 183-221, (1996). 1 1 2 . Glasser, B.J., Hildebrandt, D. and Glasser, D., Optimal Mixing for Exothermic Reversible Reactions, I&EC Research, 31, 1541-1549, (1992).
Last Updated on: May 2021
Benjamin Glasser's Publications 1 . Kottlan, A., Glasser, B.J., and Khinast, J.G., Vibratory Mixing of Pharmaceutical Powders on a Single-Tablet- Scale, Powder Technology, 387, 385-395, (2021). 2 . Hartmanshenn, C., Halota, M., Chaksmithanont, P., Leung, C., Khinast, J.G., Papageorgiou, C.D., Mitchell, C., Quon, J., and Glasser, B.J., Scale Up of Heat Transfer for Dry Granular Material in a Cylindrical Bladed Mixer, Powder Technology, 385, 336-347, (2021). 3 . Chen, I.Y., Navodia, S., Yohannes, B., Nordeck, L., Machado, B., Ardalani, E., Borghard, W.G., Glasser, B.J., Cuitino, A.M., Flow of a Moderately Cohesive FCC Catalyst in Two Pilot-Scale Rotary Calciners: Residence Time Distribution and Bed Depth Measurements with and without Dams, Chemical Engineering Science, 230, 116211, 1-16, (2020). 4 . Fathollahi, S., Faulhammer, E., Glasser, B.J., and Khinast, J.G., Impact of Powder Composition on Processing-relevant Properties of Pharmaceutical Materials: An Experimental Study, Advanced Powder Technology, 31, 2991-3003, (2020). 5 . Chen, H., Diep, E., Langrish, T.A.G., and Glasser, B.J., Continuous Fluidized Bed Drying: Residence Time Distribution Characterization and Effluent Moisture Content Prediction, AIChE Journal, 66, e16902, 1-13, (2020). 6 . Hartmanshenn, C., Khinast, J.G., Papageorgiou, C.D., Mitchell, C., Quon, J., and Glasser, B.J., Heat Transfer of Dry Granular Materials in a Bladed Mixer: Effect of Thermal Properties and Agitation Rate, AIChE Journal, 66, e16861, 1-15, (2020). 7 . Omar, T.A., Oka, S., Muzzio, F.J., and Glasser, B.J., Manufacturing of Pharmaceuticals by Impregnation of an Active Pharmaceutical Ingredient onto a Mesoporous Carrier: Impact of Solvent and Loading, Journal of Pharmaceutical Innovation, 14, 194-205, (2019). 8 . Noorithaya, A.V., Bishop, C., Sarkar, P., Khinast, J.G., and Glasser, B.J., Drying of Supported Catalysts for High Metal Concentrations: A Reduced Parameter Model, Chemical Engineering Science, 206, 361-374, (2019). 9 . Grigorov, P.I., Muzzio, F.J., and Glasser, B.J., Modeling Fluidized Bed Impregnation of Active Pharmaceutical Ingredients onto Porous Excipients, Chemical Engineering Science, 202, 36-54, (2019). 1 0 . Govender, N., Rajamani, R., Wilke, D.N., Wu, C.-Y., Khinast, J.G., Glasser, B.J., Effect of Particle Shape in Grinding Mills using a GPU Based DEM Code, Minerals Engineering, 129, 71-84, (2018). 1 1 . Boonkanokwong, V., Frank, R.P., Valliappan, P., Remy, B., Khinast, J.G., and Glasser, B.J., Flow of Granular Materials in a Bladed Mixer: Effect of Particle Properties and Process Parameters on Impeller Torque and Power Consumption, Advanced Powder Technology, (2018). 1 2 . Chen, H., Rustagi, S., Diep, E., Langrish, T.A.G., Glasser, B.J., Scale-up of Fluidized Bed Drying: Impact of Process and Design Parameters, Powder Technology, 339, 8-16, (2018). 1 3 . Govender, N., Wilke, D.N., Wu, C.-Y., Rajamani, R., Khinast, J.G., Glasser, B.J., Large-scale GPU based DEM modeling of mixing using irregularly shaped particles, Advanced Powder Technology, 29, 2476- 2490, (2018). 1 4 . Paredes, I.J., Yohannes, B., Emady, H.N., Muzzio, F.J., Maglio, A., Borghard, W.G., Glasser, B.J., and Cuitino, A.M., Measurement of the Residence Time Distribution of a Cohesive Powder in a Flighted Rotary Kiln, Chemical Engineering Science, 191, 56-66, (2018). 1 5 . Grigorov, P.I., Glasser, B.J., and Muzzio, F.J., Cross- Sectional Analysis of Impregnated Excipient Particles by Energy Dispersive X-ray Spectroscopy, Powder Technology, 332, 197-209, (2018). 1 6 . Ebrahimi, M., Siegmann, E., Prieling, D., Glasser, B.J., and Khinast, J.G., An Investigation of the Hydrodynamic Similarity of Single-Spout Fluidized Beds using CFD-DEM Simulations, Advanced Powder Technology, 28, 2465-2481, (2017). 1 7 . Chen, H., Liu, X., Bishop, C., Glasser, B.J., Fluidized Bed Drying of Pharmaceutical Powder: A Parametric Investigation of Drying of Dibasic Calcium Phosphate, Drying Technology, 35, 1602-1608, (2017). 1 8 . Paredes, I.J., Yohannes, B., Glasser, B.J., Borghard, W.G., Emady, H.N., Muzzio, F.J., Beeckman, J., Ilias, S., Podsiadlo, P., Jezek, E., Baumgartner, J., Cuitino, M.A., The Effect of Operating Conditions on the Residence Time Distribution and Axial Dispersion Coefficient of a Cohesive Powder in a Rotary Kiln, Chemical Engineering Science, 158, 50-57, (2017). 1 9 . Wang, Y., Li, T. , Muzzio, F.J., Glasser, B.J., Predicting Feeder Performance Based on Material Flow Properties, Powder Technology, 308, 135-148, (2017). 2 0 . Grigorov, P.I., Glasser, B.J. and Muzzio, F.J., Improving Dissolution Kinetics of Pharmaceuticals by Fluidized Bed Impregnation of Active Pharmaceutical Ingredients, AICHE Journal, 62, 4201-4214, (2016). 2 1 . Koynov, S., Muzzio, F.J., Glasser, B.J., A Novel Consolidation Method to Measure Powder Flow Properties using a Small Amount of Material, AICHE Journal, 62, 4193-4200, (2016). 2 2 . Yohannes, B., Emady, H.N., Anderson, K., Pardes, I.J., Javed, M., Borghard W., Muzzio, F.J., Glasser, B.J., Cuitino, A.M, Scaling of Heat Transfer and Temperature Distribution of Granular Flows in Rotating Drums, Physical Review E, 94, 042902, 1-5, (2016). 2 3 . Boonkanokwong, V., Remy, B., Khinast, J.G., and Glasser, B.J., The effect of the number of impeller blades on granular flow in a bladed mixer, Powder Technology, 302, 333-349, (2016). 2 4 . Wu, S., Panikar, S.S., Singh, R., Zhang, J., Glasser, B.J., Ramachandran, R., A Systematic Framework to Monitor Mulling Processes using Near Infrared Spectroscopy, Advanced Powder Technology, 27, 1115- 1127, (2016). 2 5 . Emady, H.N., Anderson, K.V., Borghard, W.G., Muzzio, F.J., Glasser, B.J., Cuitino. A., Prediction of Conductive Heating Time Scales of Particles in a Rotary Drum, Chemical Engineering Science, 152, 45-54, (2016). 2 6 . Wang, Y., Koynov, S., Glasser, B.J., Muzzio, F.J., A Method to Analyze Shear Cell Data of Powders Measured under Different Initial Consolidation Stresses, Powder Technology, 294, 105-112, (2016). 2 7 . Adepu, M., Hate, S., Bétard, A., Oka, S., Schongut, M., Sen, M., Sood, Y., Wolf, D., Wieland, S., Stepanek, F., Muzzio, F., Glasser, B.J., Ramachandran, R., Quantitative Validation and Analysis of the Regime Map Approach for the Wet Granulation of Industrially Relevant Zirconium Hydroxide Powders, Powder Technology, 294, 177-184, (2016). 2 8 . Koynov, S., Wang, Y., Redere, A., Amin, P., Emady, H.N., Muzzio, F.J., Glasser, B.J., Measurement of the Axial Dispersion Coefficient of Powders in a Rotating Cylinder: Dependence on Bulk Flow Properties, Powder Technology, 292, 298-306, (2016). 2 9 . Scicolone, J.V., Metzger, M.J., Anderson, K.V., Koynov, S., Glasser, B.J., and Muzzio, F.J., Effect of Liquid Addition on the Bulk and Flow Properties of Fine and Coarse Glass Beads, AIChE Journal, 62, 648-658, (2016). 3 0 . Emady, H.N., Wittman, M., Koynov, S., Borghard, W.G., Muzzio, F.J., Glasser, B.J., Cuitino. A., A Simple Color Concentration Measurement Technique for Powders, Powder Technology, 286, 392-400, (2015). 3 1 . Koynov, S., Glasser, B.J., and Muzzio, F.J., Comparison of Three Rotational Shear Cell Testers: Powder Flowability and Bulk Density, Powder Technology, 283,103-112, (2015). 3 2 . Schrank, S., Kann, B., Saurugger, E., Hainschitz, M., Windbergs, M., Glasser, B.J., Khinast, J.G., Roblegg, E., The Effect of the Drying Temperature on the Properties of Wet-extruded Calcium Stearate Pellets: Pellet Microstructure, Drug Distribution, Solid State and Drug Dissolution, International Journal of Pharmaceutics, 478, 779-787, (2015). 3 3 . Remy, B., Saurer, E., Kightlinger, W., Domagalski, N. and Glasser, B.J., Scale-up of Agitated Drying: Effect of Shear Stress and Hydrostatic Pressure on API Powder Properties, AIChE Journal, 61, 407-418, (2015). 3 4 . Liu, X., Khinast, J.G. and Glasser, B.J., Drying of Ni/Alumina Catalysts: Control of the Metal Distribution Using Surfactants and the Melt Infiltration Method, I&ECR, 53, 5792-5800, (2014). 3 5 . Schrank, S., Kann, B., Saurugger, E., Ehmann, H., Werzer, O., Windbergs, M., Glasser, B.J., Zimmer, A., Khinast, J.G., Roblegg, E., Impact of Drying on Solid State Modifications and Drug Distribution in Ibuprofen- Loaded Calcium Stearate Pellets, Molecular Pharmaceutics, 11, 599-609, (2014). 3 6 . Heigl, N., Koller, D.M., Glasser, B.J., Muzzio, F.J., Khinast, J. G., Quantitative On-line vs. Off-line NIR Analysis of Fluidized Bed Drying with Consideration of the Spectral Background, European Journal of Pharmaceutics and Biopharmaceutics, 85, 1064-1074, (2013). 3 7 . Schrank, S., Birthe, K., Windbergs, M., Glasser, B.J., Zimmer, A., Khinast, J., Roblegg, E., Microstructure of Calcium Stearate Matrix Pellets: A Function of the Drying Process, Journal of Pharmaceutical Sciences, 102, 3987-3997, (2013). 3 8 . Grigorov, P.I., Glasser, B.J. and Muzzio, F.J., Formulation and Manufacture of Pharmaceuticals by Fluidized Bed Impregnation of Active Pharmaceutical Ingredients onto Porous Carriers, AIChE Journal, 59, 4538-4552, (2013). 3 9 . Gao, Y., Glasser, B.J., Ierapetritou, M.G., Cuitino, A., Muzzio, F.J., Beeckman, J.W., Fassbender, N.A., and Borghard, W.G., Measurement of Residence Time Distribution in a Rotary Calciner, AIChE Journal, 59, 4068-4076, (2013). 4 0 . Scheibelhofer, O., Balak, N., Wahl, P., Koller, D.M., Glasser, B.J., and Khinast, J.G. Monitoring Blending of Pharmaceutical Powders with Multi-point NIR Spectroscopy, AAPS PharmSciTech, 14, 234-244, (2013). 4 1 . Vasilenko, A., Koynov, S., Glasser, B.J. and Muzzio, F.J., Role of Consolidation State in the Measurement of Bulk Density and Cohesion, Powder Technology, 239, 366-373, (2013). 4 2 . Metzger, M.J., Glasser, B.J., Patel, B.,Fox, J.,Sempuga, C., Hildebrandt, D., and Glasser, D., Liquid Fuels from Alternative Carbon Sources Minimizing Carbon Dioxide Emissions, AIChE Journal, 59, 2062-2078, (2013). 4 3 . Jain, A., Metzger, M.J., Glasser, B.J., Effect of Particle Size Distribution on Segregation in Vibrated Systems, Powder Technology, 237, 543-553, (2013). 4 4 . Metzger, M.J., Glasser, B.J., Simulation of the Breakage of Bonded Agglomerates in a Ball Mill, Powder Technology, 40, 304-314, (2013). 4 5 . Metzger, M.J., Glasser, B.J., Patel, B., Hildebrandt, D., and Glasser D. Teaching Process Design through Integrated Process Synthesis, Chemical Engineering Education, 46:4, 260-270, (2012). 4 6 . Remy, B., Khinast, J.G. and Glasser, B.J., Wet Granular Flows in a Bladed Mixer: Experiments And Simulations of Monodisperse Spheres, AIChE Journal, 58, 3354–3369, (2012). 4 7 . Metzger, M.J., Desai, S.P., Glasser, D., Hildebrandt, D., Glasser, B.J., Using the Attainable Region Analysis to Determine the Effect of Process Parameters on Breakage in a Ball Mill, AIChE Journal, 58, 2665–2673, (2012). 4 8 . Thyagu, N.N., Vasilenko, A., Voyiadjis, A., Glasser, B.J., Shinbrot, T, Stuck in Traffic: Patterns of Powder Adhesion, The European Physical Journal E, 35, 1-5, (2012). 4 9 . Liu, X., Khinast, J.G. and Glasser, B.J., Drying of Supported Catalysts for Low Melting Point Precursors: Impact of Metal Loading and Drying Methods on the Metal Distribution, Chem. Eng. Sci., 79, 187-199, (2012). 5 0 . Schrank, S. Hodzic, A., Zimmer, A., Glasser, B.J., Khinast, J.G., Roblegg, E., Ibuprofen-Loaded Calcium Stearate Pellets: Drying-Induced Variations in Dosage Form Properties, AAPS PharmSciTech, 13, 686-98, (2012). 5 1 . Radl, S., Brandl, D., Heimburg, H., Glasser, B.J., Khinast, J.G. Flow and Mixing of Granular Material over a Single Blade, Powder Technology, 226, 199-212, (2012). 5 2 . Suzzi, D., Toschkoff, G., Radl, S., Machold, D., Fraser, S.D. Glasser, B.J., Khinast J.G. DEM Simulation of Continuous Tablet Coating: Effects of Tablet Shape and Fill Level on Inter-Tablet Coating Variability, Chem. Eng. Sci., 69, 107-121, (2012). 5 3 . Metzger, M.J., Glasser, B.J., Numerical Investigation of the Breakage of Bonded Agglomerates during Impact, Powder Technology, 217, 304-314, (2012). 5 4 . Siraj, M.S., Radl, S., Glasser, B.J., Khinast, J.G., Effect of Blade Angle and Particle Size on Powder Mixing Performance in a Rectangular Box, Powder Technology, 211, 100-113, (2011). 5 5 . Remy, B., Khinast, J.G. and Glasser, B.J., Polydisperse Granular Flows in a Bladed Mixer: Experiments and Simulations of Cohesionless Spheres, Chem. Eng. Sci., 66, 1811-1824, (2011). 5 6 . Vasilenko, A., Glasser, B.J. and Muzzio, F. J., Shear and Flow Behavior of Pharmaceutical Blends - Method Comparison Study, Powder Technology, 208, 628-636, (2011). 5 7 . Metzger, M., Remy, B. and Glasser, B.J., All the Brazil nuts are Not on Top: Vibration Induced Granular Size Segregation of Binary, Ternary and Multi-sized Mixtures, Powder Technology, 205, 42-51, (2011). 5 8 . Radeke, C.A., Glasser, B.J., and Khinast, J.G.,Large- scale Powder Mixer Simulations Using Massively Parallel GPU Architectures, Chem. Eng. Sci., 65, 6435- 6442, (2010). 5 9 . Remy, B., Canty, T.M., Khinast, J.G. and Glasser, B.J., Experiments and Simulations of Cohesionless Particles with Varying Roughness in a Bladed Mixer, Chem. Eng. Sci., 65, 4557-4571, (2010). 6 0 . Radl, S., Kalvoda, E., Glasser, B.J. and Khinast, J.G., Mixing Characteristics of Wet Granular Matter in a Bladed Mixer, Powder Technology, 200, 171-189 (2010). 6 1 . LaMarche, K., Muzzio, F.J., Shinbrot, T. and Glasser, B.J., Granular Flow and Dielectrophoresis: The Effect of Electrostatic Forces on Adhesion and Flow of Dielectric Granular Materials, Powder Technology, 199, 180-188 (2010). 6 2 . LaMarche, K., Metzger, M., Glasser, B.J. and Shinbrot, T., Shape-Mediated Ordering in Granular Blends, Physical Review E, 81, 052301 (2010). 6 3 . Liu, X., Khinast, J.G. and Glasser, B.J., Drying of Supported Catalysts: A Comparison of Model Predictions and Experimental Measurements, I&ECR, 49, 2649-2657 (2010). 6 4 . Remy, B., Khinast, J.G. and Glasser, B.J., The Effect of Mixer Properties and Fill Level on Granular Flow in a Four-Bladed Mixer, AIChE J., 56, 336-353, (2010). 6 5 . Glasser, D., Hildebrandt, D., Hausberger, B., Patel, B. and Glasser, B. J., Systems Approach to Reducing Energy Usage and Carbon Dioxide Emissions, AICHE J., 55, 2202-2207, (2009). 6 6 . Metzger, M.J., Glasser, D., Hausberger, B., Hildebrandt, D. and Glasser, B.J., Use of the Attainable Region Analysis to Optimize Particle Breakage in a Ball Mill, Chemical Engineering Science, 64, 3766-3777, (2009). 6 7 . Remy, B., Khinast, J.G. and Glasser, B.J., Discrete Element Simulation of Free Flowing Grains in a Four- Bladed Mixer, AICHE J., 55, 2035-2048, (2009). 6 8 . LaMarche, K.R., Shah, S.K., Liu, X., Shinbrot, T. and Glasser, B.J., Electrostatic charging during the flow of grains from a cylinder, Powder Technology, 195, 158- 165, (2009). 6 9 . Hildebrandt, D., Glasser, D., Hausberger, B., Patel, B. and Glasser, B. J., Producing Transportation Fuels with Less Work, Science, 323, 1680-1681, (2009). 7 0 . Liu, X., Metzger, M. and Glasser, B.J., Granular and Gas- Particle Flows in a Channel with a Bidisperse Particle Mixture, Chemical Engineering Science, 63, 5696- 5713, (2008). 7 1 . Liu, X., Khinast, J.G. and Glasser, B.J., A Parametric Investigation of Impregnation and Drying of Supported Catalysts, Chem. Eng. Sci., 63, 4517-4530, (2008). 7 2 . Liu, X., Howley, M.A., Johri, J. and Glasser, B.J., The hydrodynamic stability of a fluid-particle flow: instabilities in gas-fluidized beds, Chemical Engineering Education, 42:4, 179-184, (2008). 7 3 . Liu, X., Metzger, M. and Glasser, B.J., Couette Flow with a Bidisperse Particle Mixture, Phys. Fluids, 19, 073301, (2007). 7 4 . LaMarche, K., Conway, S.L., Glasser, B.J., and Shinbrot, T, Cellular Automata Model of Gravity-driven Granular Flows, Granular Matter, 9, 219-229, (2007). 7 5 . Liu, X., Howley, M.A., Glasser, B.J., Instability of Bounded Gas-Particle Fluidized Beds, AIChE J., 53, 811-824, (2007). 7 6 . Metzger, M., Glasser, B.J., Glasser, D., Hausberger, B., Hildebrandt, D., Teaching Reaction Engineering Using the Attainable Region, Chemical Engineering Education, 41:4, 258-264, (2007). 7 7 . Raffensberger, J., Glasser, B.J. and Khinast, J.G., Effect of Droplet Wake Phenomena on Mixing-Sensitive Pharmaceutical Reactions, Pharm. Tech., 30:11, 66-79, (2006). 7 8 . Conway, S.L., Liu, X, and Glasser, B.J., Instability- induced clustering and segregation in high-shear Couette flows of model granular materials, Chem. Eng. Sci., 61, 6404-6423, (2006). 7 9 . Lekhal, A., Conway, S.L., Glasser, B.J., and Khinast J.G., Characterization of Granular Flow of Wet Solids in a Bladed Mixer, AIChE J., 52, 2757-2766, (2006). 8 0 . Caicedo-Carvajal, C., Glasser, B.J. and Shinbrot, T, Granular Flow Transitions on Sinusoidal Surfaces, J. Fluid Mech., 556, 253-269, (2006). 8 1 . Shinbrot, T, LaMarche, K., and Glasser, B.J., Triboelectrification and Razorbacks: geophysical patterns produced in dry grains, Phys. Rev. Lett., 96, 178002, 1-4, (2006) . 8 2 . Liu, X., and Glasser, B.J., A Parametric Investigation of Gas-Particle Flow in a Vertical Duct, AIChE J., 52, 940 - 956, (2006). 8 3 . Conway, S.L., Lekhal, A., Khinast J.G., and Glasser, B.J., Granular Flow and Segregation in a Four-Bladed Mixer, Chem. Eng. Sci., 60, 7091-7107, (2005). 8 4 . Raffensberger, J., Glasser, B.J. and Khinast, J.G., Analysis of Heterogeneously Catalyzed Reactions at the Gas-Liquid Interface of Bubbles, AIChE J., 51, 1482- 1496, (2005). 8 5 . Howley, M.A., and Glasser, B.J., A Comparison of One- dimensional Traveling Waves in Inverse and Normal Fluidized Beds, Physica D., 201, 177-198, (2005). 8 6 . Conway, S.L., Shinbrot, T., and Glasser, B.J., A Taylor Vortex Analogy in Granular Flows, Nature, 431, 433- 437, (2004). 8 7 . Johri, J., and Glasser, B.J., A Bifurcation Approach to Understanding Instabilities in Gas-Fluidized Beds using a Single Phase Compressible Flow Model , Computers & Chemical Engineering, 28, 2677-2693, (2004). 8 8 . Conway, S.L., and Glasser, B.J., Density Waves and Coherent Structures in Granular Couette Flows, Phys. Fluids, 16, 509-529, (2004). 8 9 . Lekhal, A., Glasser, B.J., and Khinast J.G., Influence of Ph and Ionic Strength on the Metal Profile of Impregnation Catalysts, Chem. Eng. Sci., 59, 1063-1077, (2004). 9 0 . Lekhal, A., Girard, K. P., Brown, M. A., Kiang, S., Khinast J. and Glasser, B.J., The Effect of Agitated Drying on the Morphology of L-Threonine (Needle-like) Crystals, Int. J. Pharmaceutics, 270, 263-277, (2004). 9 1 . Wright, P., Liu, X., and Glasser, B.J., A Fluidized Bed Adsorption Laboratory Experiment, Chemical Engineering Education, 38:1, 14-21, (2004). 9 2 . Liss, E., Conway, S.L., Zega, J.A., and Glasser, B.J., Segregation of Powders during Gravity Flow through Vertical Pipes, Pharm. Tech., 28:2, 78-96, (2004). 9 3 . Lekhal, A., Girard, K. P., Brown, M. A., Kiang, S., Glasser, B.J., and Khinast J., Impact Of Agitated Drying On Crystal Morphology: KCL-Water System, Powder Technology, 132, 119-130, (2003). 9 4 . Raffensberger, J., Koynov, A.A., Glasser, B.J. and Khinast, J.G. Influence of Particle Properties on the Yield and Selectivity of Fast Heterogeneously Catalyzed Gas-Liquid Reactions, Int. J. Chemical Reactor Eng., 1, A15, 1-16, (2003). 9 5 . Conway, S.L., Goldfarb, D.J., Shinbrot, T., and Glasser, B.J., Free Surface Waves in Wall-Bounded Granular Flows, Phys. Rev. Lett., 90, 074301, 1-4, (2003). 9 6 . Howley, M., and Glasser, B.J., Hydrodynamics of a Uniform Liquid-Fluidized Bed containing a Binary Mixture of Particles, Chem. Eng. Sci., 57, 4209-4226, (2002). 9 7 . Liss, E., Conway, S.L. and Glasser, B.J., Density Waves in Gravity-Driven Granular Flows, Phys. Fluids, 14, 3309-3326 (2002). 9 8 . Johri, J., and Glasser, B.J., Connections between Density Waves in Fluidized Beds and Compressible Flows, AIChE J., 48, 1645-1664, (2002). 9 9 . Muzzio, F.J., Shinbrot, T. and Glasser B.J., Powder Technology in the Pharmaceutical Industry: The Need to Catch Up Fast, Powder Tech., 124, 1-7, (2002) (invited article). 1 0 0 . Goldfarb, D., Glasser, B.J., and Shinbrot, T., Shear Instabilities in Granular Flows, Nature, 415, 302-305, (2002). 1 0 1 . Glasser, B.J., Cole J., and Muzzio, F.J., A Comprehensive Approach to Pharmaceutical Engineering Training, Pharm. Tech., 25:12, 34-36, (2001). 1 0 2 . Lekhal, A., Khinast J.G., and Glasser, B.J., Predicting the Effect of Drying on Supported Co-Impregnation Catalysts, I&EC Research, 40, 3989-3999, (2001). 1 0 3 . Liss, E., and Glasser, B.J., The Influence of Clusters on the Stress in a Sheared Granular Material, Powder Tech., 116, 116-132, (2001). 1 0 4 . Lekhal, A., Glasser, B.J., and Khinast J.G., Impact of Drying on the Catalyst Profile in Supported Impregnation Catalysts, Chem. Eng. Sci., 56, 4473- 4487, (2001). 1 0 5 . Wright, P.R., and Glasser, B.J., Modeling Mass Transfer and Hydrodynamics in Fluidized Bed Adsorption of Proteins, AIChE J., 47, 474-488, (2001). 1 0 6 . Glasser, B.J., and Goldhirsch, I., Scale Dependence, Correlations and Fluctuations of Stresses in Rapid Granular Flows, Phys. Fluids, 13, 407-420, (2001). 1 0 7 . Wright, P.R., Muzzio, F.J., and Glasser, B.J., Effect of Resin Characteristics on Fluidized Bed Adsorption of Proteins, Biotechnol. Prog., 15, 932-940, (1999). 1 0 8 . Wright, P.R., Muzzio, F.J., and Glasser, B.J., Batch Uptake of Lysozyme: Effect of Solution Viscosity and Mass Transfer on Adsorption, Biotechnol. Prog., 14, 913-921, (1998). 1 0 9 . Glasser, B.J., Sundaresan, S., Kevrekidis, I.G., From Bubbles to Clusters in Fluidized Beds, Phys. Rev. Lett., 81, 1849-1852, (1998). 1 1 0 . Glasser, B.J., Kevrekidis, I.G. and Sundaresan, S., Fully- developed Traveling Wave Solutions and Bubble Formation in Fluidized Beds, J. Fluid Mech., 334, 157- 188, (1997). 1 1 1 . Glasser, B.J., Kevrekidis, I.G. and Sundaresan, S., One- and Two-dimensional Traveling Wave Solutions in Gas-Fluidized Beds, J. Fluid Mech., 306, 183-221, (1996). 1 1 2 . Glasser, B.J., Hildebrandt, D. and Glasser, D., Optimal Mixing for Exothermic Reversible Reactions, I&EC Research, 31, 1541-1549, (1992).